Carbon Paste Electrodes for Oxomemazine Hydrochloride: Fabrication and Evaluation

Abstract

The evaluation of oxomemazine hydrochloride (OXCl) prepared in carbon paste electrodes is reported in detail. There are many practical techniques and experiments for electrode preparation one of them is mixing of the ion-pair with ion pairing agent. Prepared electrodes gave satisfactory data in ranging from (0.018 to 18.35) mg based on Nernstian cationic slopes, the used electrodes refer to the standard data obtained at (slope 58.7±2.1 mV decade-1) by using sodium tetraphenylborate (NaTPB) and rapid response time equal to 15 s and lifetime approximately equal to (4 weeks). The prepared electrodes can be counted as end point indicator electrode for potentiometric titration of oxomemazine Hydrochloride OXCl resulting in a high percentage of accuracy.

Authors and Affiliations

Naglaa Mahmoud Mohamed, Yousry Moustafa Issa, Nabila Shehata Mohamed, Hussein Shaban Mohamed, Sayed Abdelkader Ahmed

Keywords

Related Articles

Comparison of Chemical and Biological Properties of Metal Nanoparticles (Au, Ag), with Metal Oxide Nanoparticles (ZnO-NPs) and their Applications

Biological application of nanoparticles (NPs) is a rapidly developing area of nanotechnology, providing new possibilities in the diagnosis and treatment of human diseases. Nowadays, NPs have shown abilities to be used as...

Kinetics and Mechanism of Propane-1,3-diol Oxidation by Mn(VII) in Aqueous Medium

The oxidation of propane-1, 3-diol by potassium permanganate in aqueous solution was investigated at λmax 525 nm. The rate of the reaction was found to increase with increase in [KMnO4] and [Propane-1, 3-diol]. The react...

An Improved Escherichia Coli Bacterium Detection in Microchannel Based on Dielectrophoresis Impedance Measurements

In this study, a bacterial detection technique utilizing benefits of both positive and negative dielectrophoresis has been simulated with COMSOL Multiphysics. The two dimensional proposed model has six microelectrodes ac...

Metal-organic frameworks as precursor for metal oxide nanostructures Part I: MOF-derived copper oxide embedded in carbon matrix

Three isostructural metal-organic framework materials (MOFs) formulated as M[(HBTC)(H2O)]ˑH2O(M = Cu for 1, Zn for 2 and Ca for 3) constructed with 1, 3, 5-benzenetricarboxylate (BTC) were synthesized under hydro/solvoth...

Effect of partial substitution of raw gypsum with thermally treated phosphogypsum on the properties of Portland Pozzolanic Cement

For many years of production of phosphate fertilizer very large amounts of phosphogypsum (PG) occupied large area, causing chemical and radiological environmental. Using of PG in building materials represents a good meth...

Download PDF file
  • EP ID EP619409
  • DOI 10.33945/SAMI/AJCA.2020.1.4
  • Views 52
  • Downloads 0

How To Cite

Naglaa Mahmoud Mohamed, Yousry Moustafa Issa, Nabila Shehata Mohamed, Hussein Shaban Mohamed, Sayed Abdelkader Ahmed (2020). Carbon Paste Electrodes for Oxomemazine Hydrochloride: Fabrication and Evaluation. Advanced Journal of Chemistry-Section A (Theoretical, Engineering and Applied Chemistry), 3(1), 24-35. https://europub.co.uk/articles/-A-619409