Case Study Regarding the Design of a Direct Current Electromagnet for the MIG Welding of Metallic Materials Part I: Description of the Welding Methods and Preliminary Calculus of the Electromagnet
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2016, Vol 23, Issue 1
Abstract
The paper refers to the design of a direct current electromagnet, located on the head of a swan neck welding gun of a MIG welding equipment and used for magnetising the rotation space of two additional electric arches, in order to preheat the electrode wire and of the protective gas, partially turned into plasma jet. One describes the MIG welding method in which the electromagnet is used as well as its preliminary calculus.
Authors and Affiliations
Tudorel Ene
Keywords
Related Articles
- EP ID EP446870
- DOI -
- Views 90
- Downloads 0
Design and Simulation of Electrocardiogram Circuit with Automatic Analysis of ECG Signal
An electrocardiogram (ECG) is the graphical record of bioelectric signal generated by the human body during cardiac cycle, it tells a lot about the medical status of an individual. A typical ECG waveform consist of the P...
Sensitivity Modeling and Evaluation of Evapo-transpiration Effects on Flow Discharge of River Owena in Nigeria
Analysis of discharges, precipitation and temperature and some other meteorological-hydrological variables from 1996-2011 at the section of Owena River Basin. The evaluation, correlations, and the relationship between pr...
Passive Control Solutions Applied to Civil Constructions under Dynamic Load
In the paper an overview of passive control solutions used for reduction of vibration of civil engineering structures is presented and the special attention is put on the friction pendulum bearings applications as the ex...
Treatment Solutions for Rainwater Contaminated with Various Pollutants
This study presents aspects on the environmental pollution with contaminants difficult to manage from sources such as car parking, roads and roofs in crowded areas that have deficient wastewater harvesting urban networks...
Influence at Work Distance between the Sonotrode and Specimen to Cavitational Erosion
The paper presents the results of cavitation erosion tests performed on five samples from pure aluminum using the vibratory method with stationary specimen. The main purpose of this research is for deter-mine which is...