CFD Analysis of Pelton Bucket
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Pelton wheel turbine is by and large utilized for mechanical power age in hydroelectric power plant. Vibration delivered in the framework is constrained vibration. The dynamic attributes of a hydro turbine control depend intensely on changes in stack unsettling influences. In this way the hydro turbine shows very nonlinear, non-stationary framework whose qualities differ fundamentally with the capricious load. At the point when the Natural recurrence of the turbine agrees with genuine recurrence of the turbine causes the arrangement of the reverberation. This reverberation frames the expansion in odds of disappointment of the turbine by clasping of miss hapening of the pole. The purpose of the work is too liquid dynamic examination of Pelton can edge with a change of material in the substitution and the Physical and mechanical properties of the ebb and flow material which is used to deliver control as a lightweight material by the drive of data water feed. The computational fluid dynamic examination is done to choose the weight use of different materials
Authors and Affiliations
R. PRAVEEN KUMAR
Keywords
Related Articles
- EP ID EP280255
- DOI 10.24247/ijmperdfeb201886
- Views 66
- Downloads 0
Effect of EGR on Performance of CI Engine with Diesel and Cotton Seed Oil as Fuels
Automobile emission is one of the major problems in the environment. Engine emits the carbon monoxide (CO), unburnt hydrocarbon (HC) and smoke density, etc and causing a variety of health and environmental problems at th...
CONTACT STRESS ANALYSIS & OPTIMIZATION OF SPUR GEAR BY FINITE ELEMENT ANALYSIS
The gears are the most common means to transmit the power. Spur Gears are used in many machine tools to transmit the power like Lathe machines, Drilling Machines etc. Since the Spur gears are subjected to high loads in s...
Energy Potential of Sugar-Mill Byproduct Press-Mud Through Pyrolysis Process
Press-mud is the sugar industry left-over produced from the filtration of the sugar cane juice during the production of sugar. At present, it is a good source of fertilizer and utilized in soil quality enhancement in Ind...
Manufacture and Analysis of MgB2 Superconducting Wire with Addition Carbon Nano Tube (CNT) by In-Situ
The study has been conducted on making samples of MgB2 superconducting wire, by adding 1% CNT with situ method. MgB2 is a superconducting material that has a critical temperature of 39 K. The making process begins with w...
Mechanical and Thermomechanical Properties of Carbon Fibre Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modelling (FDM) Method: a Review
Fused deposition modelling (FDM) is widely used method to fabricate thermoplastic parts, which are mainly used as rapid prototypes for functional testing with advantages of minimal wastage, and ease of material change. D...