CFD SIMULATION AND OPTIMIZATION OF POWER CONSUMPTION BY USING NANOFLUIDS
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
In this paper, we deal with a CFD simulation and optimization of power consumption by using nanofluid. so in order simulation on heat exchanging process. During the turbulent flow of hot water and cold-water, the fluid flows in between to two chevron plates in plate heat exchanger. In that, we will design a three-dimensional plate heat exchanger. mean While we will give inlets and outlets boundary condition has been designed on a plate. The main reason for doing this simulation is to compare base fluid and nanofluid so that will check the overall heat transfer coefficient for a both fluids
Authors and Affiliations
Keywords
Related Articles
- EP ID EP376974
- DOI -
- Views 109
- Downloads 0
An Examination of the Essential Aspects in Execution of Enterprise Resource Planning in Manufacturing and Production Industries
Manufacturing and Production Industries in India, provide the most diligent profession and they are also the predecessor in emerging novel thought in the field of industry. They do not merely participate in possessing a...
The Effect of Inlet Flow Profile, Carotid Bulb Diameter and Non Newtonian Blood Viscosity on the Wall Shear Stress in a Carotid Artery Bifurcation Model for Transient Flow
The carotid artery begins at the aorta within the chest and courses up through the neck to the head. The most common site of atherosclerotic plaque development is at the carotid bifurcation. The size, shape and location...
Comparison of Wall Temperatures on Scramjet Inlets at Hypersonic Velocities
Skin frictions produced at high operational speeds generate lots of heat on the surface of the aircrafts. It is very much essential to determine the quantity of the heat produced on the outermost layer of the vehicle dur...
Influence of Addition of Silicon on Mechanical Properties of Aluminium - Zinc Alloy
In this investigation, the experiment was conducted to analyze the mechanical properties such as Yield Strength, Ultimate Tensile Strength, Hardness on Al-Zn alloy of different composition Specimen 1 (89.4%Al4%Zn1%Mg0.6%...
Improvement of Weldment by Post Weld Heat Treatment of Low Carbon Steel
Low carbon steel is also known as Corten steel. It has a lower level of carbon (0.05% to 0.3%). Low carbon steel is widely used in the constructional industry for building bridges, buildings, and telecommunication towers...