Changes in the quality indicators of shirt fabrics with different fiber compositions
Journal Title: Modern Innovations, Systems and Technologies - Year 2022, Vol 2, Issue 1
Abstract
The quality of textile fabrics is evaluated by physical, mechanical, consumer and hygienic properties. The durability of a fabric is also characterized by its resistance to abrasion. In turn, this durability and breathability of the fabric depends on many important factors, such as the strength of the yarn, the type of fiber, the composition of the yarn and its linear density, the density and thickness of the fabric, the thickness of the fabric, and so on. The abrasion resistance and breathability of a fabric largely depend on its structural characteristics, i.e., the degree of bending and the density of the warp and purl threads. This degree of bending is determined by the area of one or another part of the product and the purl thread. This area is the reference surface of the tissue. In this article, a comparison of the quality indicators of shirt fabrics with twill weave from 100% polyester fiber and 100% cotton shirt fabrics with twill weave, as well as changes in their properties of breathability, wrinkle resistance, abrasion resistance, was studied.
Authors and Affiliations
S. E. Mardonov, L. I. Toshpulotov, D. J. Erjanova, N. H. Karimova
Keywords
Related Articles
- EP ID EP706169
- DOI https://doi.org/10.47813/2782-2818-2022-2-1-76-82
- Views 107
- Downloads 0
On the ways of forming information structures for modeling objects, environments and processes
The paper discusses the well-known concepts of matter, objects, environments, information and information field in relation to the proposed information representation of the interaction of objects and environments based...
Parameters of roll contact curves of two-roll modules
Analytical dependencies were obtained to calculate the lengths of roll contact curves, the lengths of the slip and no-slip zones, and angles that determine the position of the separation points of these zones. It was rev...
Investigation of the unevenness of the linear density of the thread and the choice of individual indicators of the quality of the thread
The article gives questions about improving the quality of yarn and reducing its discontinuity, which are closely related to the unevenness of semi-finished products that occur during their extraction. It is explained by...
Determination of parameters of a trepanning machine for cleaning wool fibers
This article provides information about the technology of primary processing of wool and the feeding part of the baking machine. It analyzes the operating principle and types of baking machines at the enterprise of prima...
Calculation of the stability of the inter-saw gasket under compression
The article presents the results of calculating the stability of the inter-saw gasket under compression for a 5LP linter machine. An increase in the value of the number of half-waves for steel St3 (n=0.4672) from aluminu...