Characteristics of Wood ASH/OPC Concrete
Journal Title: Leonardo Electronic Journal of Practices and Technologies - Year 2006, Vol 5, Issue 8
Abstract
The study presents the behaviour of wood ash / OPC concrete. Chemical analysis of wood ash, bulk density, sieve analysis and specific gravity of wood ash and aggregates, consistency, setting time and slump test of the fresh paste were conducted to determine the suitability of the materials for concrete making. Mix ratio of 1:2:4 and percentage replacement level of 0, 10, 20, 30 and 40 percents of cement by wood ash were used. 150mm´150mm cubes were cast, cured and crushed at 28 and 60 days to determine their compressive strength. Test result indicates that the wood ash is slightly pozzolanic, water demand increases as the ash content increases and the setting time of the paste increases as the ash content increases. Compressive strength of wood ash / OPC concrete it increases with age at curing with optimum replacement of cement by wood ash of 20%.
Authors and Affiliations
M. ABDULLAHI
Keywords
Related Articles
- EP ID EP139176
- DOI -
- Views 90
- Downloads 0
High Temperature Mechanical Properties of Silicon Carbide Particulate Reinforced Cast Aluminum Alloy Composite
The effect of high temperature on mechanical properties of silicon carbide particulate reinforced cast aluminum alloy composite has been investigated. 15% volume fraction silicon carbide aluminum alloy (6063) composite w...
Dynamic Compensation of the Reactive Energy using a Fuzzy Controller
Solving the capacitor Allocation problem means in general the determination of the optimal location, allocation sizes and switching times for capacitors to be installed on a distribution feeder. The application of capaci...
Molecular Descriptors Family on Structure Activity Relationships 1. Review of the Methodology
This review cumulates the knowledge about the use of Molecular Descriptors Family usage on Structure Activity Relationships. The methodology is augmented through the general Structure Activity Relationships methodology....
Robust Controller Design for Speed Control of an Indirect Field Oriented Induction Machine Drive
The use of PI controllers for speed control of induction machine drives is characterized by an overshoot during tracking mode and a poor load disturbance rejection. This is mainly caused by the fact that the complexity o...
Collaborative Influence of Zinc Oxide and Triethylene Amine on the Corrosion Behavior of Mild Steel in Hydrogen Cyanide Environment
The analysis of the relative contribution of Zinc Oxide/Triethylene Amine mixes in controlling corrosion of mild steel in hydrogen cyanide environment is undertaken in this study. In earlier works [1,2], the individual...