Characterization of Sintered Hardmetals Coated with TiC
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
This paper presents the realization of TiC thin films by CVD method. The thin layers of TiC thicknesses were 8 and 10μm, their thickness increasing with time, keeping the temperature. Diffractometer analysis certifies that this thin layer of TiC is homogeneous and unscratched. Microhardness of thin layers of TiC is HV0,05 = 30000MPa compared to WC (carbide substrate of the component) that has a microhardness HV0,05 = 17000MPa.
Authors and Affiliations
Stela CONSTANTINESCU, Lucica ORAC
Keywords
Related Articles
- EP ID EP596092
- DOI -
- Views 51
- Downloads 0
Nanostructured SiC-Ni Composite Coatings Obtained By Electrodeposition – A Tribocorrosion Study
The tribocorrosion properties of SiC (20nm) - Ni nanostructured coatings have been studied in pin on disc tribocorrosimeter connected with an electrochemical cell. The objectives of our study in principal is to fully und...
Researches Regarding Waste Processing of Cellulosic Materials by Pyrolysis Process
In this paper were performed laboratory experiments regarding processing by pyrolysis process of urban waste components (wood, paper, textiles). The authors designed and developed an experimental equipment and were appli...
Study Related to Improve Performance of a Neutralizing Gas Dynamics System
Worldwide, the series of attacks "with bomb" are the most common, accounting for over 80% of terrorist attacks. The many constructive solutions of Improvised Explosive Devices (I.E.D), would require for defusing sequence...
The Different Practical Application of Niobium Carbide Coatings Elaborated by CVD Process
In this paper, the different application of niobium carbide coatings onto hard carbide substrate was investigated using scanning electron microscope (SEM), Xray diffractometer (XRD) and micro-hardness. The paper conducte...
Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloys
This paper deals with the effect of anodic oxidation treatment on the corrosion behaviour of 6061 aluminium alloy in natural sea water. Anodic oxidation treatment leads to the formation of an amorphous oxide layer on the...