CHARACTERIZATION OF THE IONIC NITRING IN THE PROCESS APPLICATION ON 12% Cr STEELS FOR TOOLS AND COLD DEFORMATION DEVICES MANUFACTURING
Journal Title: Journal of Science And Arts - Year 2009, Vol 10, Issue 1
Abstract
The ionic nitriding found a good application in the treatment of cold deformation devices that, because of the hard work conditions, must stand complex loads and show superior phzsicomechanical properties. For example, the working rolls of plate cold rolling mills must stand loads with specific tensions of 1000-2000N/m2, must present hardness of 60 HRC, a very good toughness (a high rotatingb bending fatigue strength), must stand to outstanding dynamic tests (impacts, torsion) and must present a high wer hardness and outstanding tribological properties. The good behaviour in exploitation of these devices is conditioned by severe adjustments, high dimensional accuracy and the absence of clearance in gear system, reason for that the dimensional restrictions to the manufacturing of deformation devices are very exigent. So, for cold working are used special high-speed steels, maraging steels and very often (being more accessible) steels with 12% Cr. This article analyses the possibility of applyng the ionic nitriding to steels with 12% Cr, referring to VMoC120, pursuing the way of hardening by this supplemental treatment the working surface of the deformation devices, so that they meet the quality requirements.
Authors and Affiliations
Gheorghe Vlaicu, Iulian Bancuta, Valerica Cimpoca, Ioana Dulama, Anca Gheboianu, Mariana Bahrim, Ion Popescu
Keywords
Related Articles
- EP ID EP84702
- DOI -
- Views 334
- Downloads 1
MORPHOLOGICAL AND STRUCTURAL ASPECTS USING ELECTRONIC MICROSCOPY AND IMAGE ANALYSIS OF IRON POWDERS OBTAINED BY WATER ATOMIZATION PROCESS
Quality of metal powders depends on manufacturing process and heat treating parameters. Among the physical, mechanical and structural characteristics of powders, the average particle size, size distribution, particle sha...
EVALUATION OF POTOP RIVER QUALITY I. PRELIMINARY INVESTIGATION AND RISK ASSESSMENT OF POLLUTED DEGREE
The Potop River quality parameters, which arose from the Piedmont Cândeşti, Dambovita county, were analysed by analitycal technique. The evolution of electrical conductivity σ (μS), Total Dissolved Solids (TDS), salinity...
QUARTZ CRYSTAL MICROBALANCE: NANO-SENSOR FOR CYANIDE DETECTION
The extremely high level of potassium cyanide toxicity makes its effects to be important even in low concentrations. Quartz crystal microbalance (QCM) allows the determination of these values due to the high sensitivity...
INVESTIGATION OF PROJECTILE MOTION ON THE INCLINED PLANE
In this paper the equations and relations of projectile motion on inclined planes are concluded from concepts such as angular momentum and torque. In addition to describing this concept explicitly, we have tried to clari...
FROM SCIENCE IN ART TO THE ART OF TEACHING SCIENCE
Students, but teachers as well, are mostly unconscious of the connection between science and art or humanist sciences, as a result of the differences between these, sometimes even due to the completely different styles i...