Characterization of the Tribological Properties of Bismuth-titanate Coatings Synthesized by Sol-gel on 316L Stainless Steel Substrates
Journal Title: Tribology in Industry - Year 2019, Vol 41, Issue 3
Abstract
The objective of this investigation was to obtain ceramic coatings of bismuth titanate by Sol-gel synthesis on 316L stainless steel substrates using bismuth nitrate pentahydrate (III) and titanium tetrabutoxide as precursors. The characterization focused on determining wear rates, coefficients of friction, adhesion, nano-hardness, and thickness of the coatings, depending on the concentration of the precursors, the speed of rotation and the number of layers. It is concluded that the sol presents favorable conditions for their potential application as coatings on metallic substrates.
Authors and Affiliations
J. Bautista-Ruiz, A. Chaparro, J. J. Olaya
Keywords
Related Articles
- EP ID EP644629
- DOI 10.24874/ti.2019.41.03.15
- Views 93
- Downloads 0
Bearing Health Monitoring
Health monitoring of bearings is a widely researched topic and has been attempted by analysing acoustic, thermal and vibration signatures. The methods usually require signal of a healthy bearing to be used as a baseline....
Effect of TiN Nanoparticles on the Friction and Wear Properties of Spark Plasma Sintered Fe-Cr-Ni
This study evaluated the dry sliding wear and friction behaviour of spark plasma sintered Fe-Cr-Ni (a duplex stainless steel known as SAF 2205) matrix with titanium nitride (TiN) nanoparticles as reinforcement. Tests wer...
An Attempt to Calibrate the Laser Induced Fluorescence (LIF) Signal used for Oil Film Thickness (OFT) Measurements in Simulating Test Rigs
The issue of laser induced fluorescence calibration for engine and simulating rigs was studied using both a static calibration rig and a dynamic method involving a modified piston-ring specimen. The technique used to mea...
Experts System Based on the Neural Network and Mobile Database in the Field Galvanic Metal Coating
In a modern era of information technologies, everyday changes are more numerous and various. One of those changes is related to the greater use of mobile devices in a decision making processes. They may be used in the fi...
Influence of Microstructure, Produced by Heat Treatment and Sever Plastic Deformation, on Tribological Properties of Low-carbon Steel
This paper presents the results of tribological investigations conducted on steel 20 with the carbon content of up to 0.2%. The steel was studied in the three conditions: initial (hot-rolled), after heat-treatment (quenc...