Characterization, Production and Microwave Absorbing Properties of Polyaniline-NiFe2O4: Tb Composites
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 3
Abstract
In this study, terbium-doped NiFe2O4 was produced by using mixed oxide technique. The Ni1-xTbxFe2O4 composition was synthesized and x was selected as 0.025, 0.050 and 0.070, respectively. The single phase Ni ferrite was produced after sintering at 1250 °C for 4 h. X-ray diffraction (XRD), scanning Electron Microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) were performed for the structural analysis. The results of the structural analysis indicated that second phase did not form in Ni1-xTbxFe2O4. Additionally, the polyaniline-terbium doped NiFe2O4 composites were produced by hot pressing using the compositions of Ni0.975Tb0.025Fe2O4.018, Ni0.950Tb0.050Fe2O4.037, Ni0.93Tb0.070Fe2O4.0525 and aniline. The weight ratios of terbium-doped nickel ferrite and aniline were 1:1 and 1:3 respectively and epoxy resin was used to produce microwave absorbing composites. The magnetic properties of fabricated composites were investigated using a vibrating sample magnetometer (VSM). The microwave absorbing performances of Polyaniline-NiFe2O4: Terbium composites were investigated by reflectivity in 0 – 8 GHz using two–port vector network analyzer. A minimum of – 39.41 dB reflection performance was obtained in 7.9 GHz at the thickness of 2.0 mm. This reflection performance can be modulated simply by controlling the content of polyaniline in the samples for the required frequency bands.
Authors and Affiliations
Ethem Ilhan Sahin, Selcuk Paker, Mesut Kartal
Keywords
Related Articles
- EP ID EP615545
- DOI 10.5755/j01.ms.25.3.20810
- Views 34
- Downloads 0
Enhanced Magnetic Squareness in Manganese-Bismuth Mechanical Alloys Incorporating Magnesium Oxide
Manganese-bismuth (MnBi) mechanical alloys have been under development for novel permanent magnets without rare-earth elements. The ball-milling of bismuth (III) oxide and manganese powders in this work leads to soft mag...
Applications of Field-Reversal and Angle-Dependent XMCD Techniques to Mn-Based Diluted Magnetic Materials
Recent progress of the soft X-ray magnetic circular dichroism (XMCD) techniques and relevant applications at beamline 4B7B in Beijing Synchrotron Radiation Facility are reported here. The key progress of the XMCD techniq...
Modification of Nife Layered Double Hydroxide and Photocatalytic Activity
Modifying materials by ions with multiple valence states is an effective way for enhancing their properties. NiFe layered double hydroxides (NiFe LDHs) were prepared by using a hydrothermal method. Efficient LDH photocat...
Enhancement of Mechanical Properties and Corrosion Resistance of Ultra-Fine Grain Al0.4FeCrCo1.5NiTi0.3 High-Entropy Alloy by MA and SPS Technologies
Al0.4FeCrCo1.5NiTi0.3 high-entropy alloy (HEA) was prepared by mechanical alloying (MA) and spark plasma sintering (SPS), which were evaluated in this study by XRD and TEM. After SPS, the bulk alloy exhibited a structure...
Effect of Sintering Temperature, Sm3+ Concentration and Excitation Wavelength on Luminescence Properties in Eu3+ Doped Strontium Tungstate Phosphors
The color-tunable SrWO4:0.20Eu3+, Sm3+ phosphors are successfully prepared by co-precipitation method at a low temperature (800 °C). These phosphors can be efficiently excited by near-ultraviolet and blue light. The phas...