Chip breaking phenomenon during cutting steel and polymer materials
Journal Title: UNKNOWN - Year 2017, Vol 16, Issue 3
Abstract
Research in 60s and 70s started to deal with the shape of the chip characterization. It was possible then to do a limited study by means of measuring tool park. During such a study, different models for chip formation became familiar, such as the Time or Merchant model. The aim of article is to gain insight into some accompanying phenomena, occurring while cutting of different materials and with various tools. During an experimental design, the possible effects of different variables on each other and individually were considered. Two work-pieces (C45, POM) with two inserts (with two different edge design) were tested while changing of cutting speed and feed. During measurements cutting forces at 5000 Hz signal reception were tested or the evolution of cutting temperature at different experimental settings was evaluated. The chip characteristics are measured by a high speed camera. The camera is connected with PC for recording and controlling the experimental procedure in real-time. The frequency of High Speed Camera was similar than the frequency of the cutting force measuring system. This similarity is provided with the system set-up synchronization.<br/><br/>
Authors and Affiliations
János Líska
Keywords
Related Articles
- EP ID EP518496
- DOI DOI: 10.30657/pea.2017.16.08
- Views 32
- Downloads 0
Effect of plastic deformation on the magnetic properties of selected austenitic stainless steels
Austenitic stainless steels are materials, that are widely used in various fields of industry, architecture and biomedicine. Their specific composition of alloying elements has got influence on their defor-mation behavio...
Electric aircraft - present and future
In this paper, an outlook about the present of electrical aviation is given. The relatively small energy density of current battery technologies is adequate to build usable electric car, but not suitable for elec-tric ai...
Organizational learning in developing the integrated quality management
High quality is organizations’ competitive advantage. It is beneficial to base this on professional ap-proach, and basic concepts and definitions with scientific foundation. The necessary main concepts consist of quality...
Plastic production machinery – the evaluation of effectiveness
In this paper TPM and PAMCO coefficients were shortly characterised. On the basis of TPM coeffi-cients its effectiveness was estimated. Thanks to using time and PAMCO coefficients, the utilization of working time machine...
IRREGULAR OPERATION OF AUTONOMOUS VEHICLES
Today, with the spread of autonomous functions in vehicles, the role accountability for causing accidents is emphasized. Self-guided functions work in certain traffic situations, but accidents happen, and, therefore, the...