Classification rule hierarchical tuning with linguistic modification based on solving fuzzy relational equations
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 4
Abstract
<p>The common problem with the hierarchical tuning methods is the lack of conditions for modification of the primary rules. The incremental approach accelerates the generation of candidate rules, but complicates the selection of the primary and modified rules.</p><p>In the paper, the approach that combines semantic training, granular partition and solution of fuzzy relational equations for constructing accurate and interpretable rules is developed. The composite fuzzy model of direct logic inference based on the primary rules with granular parameters is proposed. The method of hierarchical tuning with the linguistic modification based on solving fuzzy relational equations is developed, which allows reducing the training time.</p><p>It is shown that the weights of the primary rules, which are subject to modification, as well as the hedging threshold of the primary terms, are solutions of the primary system of fuzzy logic equations with the hierarchical max-min/min-max composition, which solves the problem of the hierarchical selection of the primary and modified rules for the given output classes. The genetic-neural approach was used for tuning the primary rules and solving the system of equations, as well as tuning the composite rules.</p><p>The effectiveness of the approach is illustrated by the example of tuning and interpreting the solutions to the technological process quality control problem for the specified productivity classes. The primary model with granular parameters allows reducing the tuning error by 25 % compared to the primary relational model. The solution of the hierarchical selection problem allows reducing the tuning time by half.</p>
Authors and Affiliations
Hanna Rakytyanska
Keywords
Related Articles
- EP ID EP527753
- DOI 10.15587/1729-4061.2018.123567
- Views 79
- Downloads 0
Analysis of inrush currents of the unloaded transformer using the circuitfield modelling methods
<p>We studied theoretically the transition processes that occur during tests of power transformers in the mode of experimental idling. A circuit-field model of electromagnetic processes is developed, based on a three-dim...
Study into the rolling of a double-layered powdered core in a metallic sheath
<p>We have developed an analytical model of the stressed-strained state of the two-layered powdered core in a metal sheath in the deformation zone when fabricating a composite material by rolling. Based on the constructe...
Refinement of the mathematical model of frequency converter cable branch with a singlephase short circuit
<p>The mathematical model of the frequency converter cable branch as a part of the mine section power network with a single phase-to-ground fault is clarified. The model takes into account a discrete nature of the output...
Development of a model for determining a priority sequence of power transformers out of service
<p>The research is devoted to the development of a model and algorithm for making decisions on determining the priority of power transformers out of service. Reducing the reliability of EPS operation, caused by the objec...
Developing the method of rational trucking routing based on the modified ant algorithm
<p>The method of rational routing based on the modified ant algorithm with introduction of a quality function that characterizes the qualitative state of roads was proposed. Comprehensive assessment of potential routes t...