Comparative Analysis of Probability of Failure Determination Using Weibull Distribution and Generic Failure Frequencies on Heat Exchanger Tube Bundles Based on API 581
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2018, Vol 2, Issue 3
Abstract
RBI analysis for heat exchanger tube has been explained by API 581. Two types of PoF determination using statistical data is provided to determine the PoF category. Both Weibull parameter and generic failure frequencies are the methods that will be analysis in this present study. PoF determination using Weibull distribution gives the exponential value of PoF in a certain of time. This method only consider failure modes and the failure rate of heat exchanger tube without considering possible active damage mechanisms in the tube. However PoF determination using generic failure frequencies gives more complex consideration. It considers not only failure and possible active damage mechanism, but also the effect of management system facilities of the heat exchanger on the integrity of the plant.
Authors and Affiliations
Dharma Gita Surya Prayoga, Dwi Priyanta, Nurhadi Siswantoro
Keywords
Related Articles
- EP ID EP335409
- DOI 10.12962/j25481479.v2i3.3576
- Views 217
- Downloads 0
Development of Power Management System for Electric Power Generation in Tanker Ship Based on Simulation
Power management system (PMS) for electric power generation in ship, in the case of tanker ship, is the system that has function to control and to monitor all generators in ship as the main electricity supplier for all e...
Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat
Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...
Analysis and Optimation Hydrofoil Supported Catamaran (HYSUCAT) Size 25 Meter based on CFD Method
In the field of transportation, ship is relatively cheap then others transportation. However, the ship still has constraints on speed and fuel consumption. Therefore, the ship has many variations of shape to achieve opti...
The Usage of Crumb Rubber Filtration and UV Radiation for Ballast Water Treatment
This research is aimed to build ship’s ballast water treatment prototype that used to inactivate microbial water patogen in ballast water to produce unpolluted ballast water that can be standardised by IMO Ballast Water...
Design of Protection Coordination for Overcurrent on Electrical System in Tanker Ship Plan Using Electro Mechanical Trip Device
Disturbance of power system in ship is unavoidable case that required a function from safety system to separate the affected parts of system. The disturbance in electrical system generally is a short-circuit current. It...