COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION
Journal Title: Applied Computer Science - Year 2018, Vol 14, Issue 4
Abstract
In the paper a numerical comparative analysis of stresses in a steel die com-pressed by a ring during the extrusion process was presented. In the research, three design solutions of the die were used. The solutions vary depending on the quotient of the wall thickness of the die insert and the wall thick-ness of the compression ring while maintaining a constant tool diameter. The stresses occurring in the areas of the ring and the die were calculated depending on the design version of the tool and the pressure value. The anal-ysis was carried out for the quotients of the die wall thickness to the ring wall thickness of 0.57, 1 and 1.75 and three press-in values of 0.004, 0.008 and 0.016 mm. The conducted research allowed determining the impact of the die design and assembly interference on the load bearing capacity. It was discovered that the use of a die insert with a smaller thickness com-pared to the thickness of the compression ring was the most advantageous from the point of view of the circumferential stresses.
Authors and Affiliations
Irena NOWOTYŃSKA, Stanisław KUT
COMPARATIVE ANALYSIS OF THE IMPACT OF DIE DESIGN ON ITS LOAD AND DISTRIBUTION OF STRESS DURING EXTRUSION
In the paper a numerical comparative analysis of stresses in a steel die com-pressed by a ring during the extrusion process was presented. In the research, three design solutions of the die were used. The solutions vary...
GRAPHICAL REPRESENTATIONS OF MULTITHREADED APPLICATIONS
This article contains a brief description of existing graphical methods for presenting multithreaded applications, i.e. Control Flow Graph and Petri nets. These methods will be discussed, and then a way to represent mult...
MACHINE LEARNING PREDICTIVE MODELING OF THE PRICE OF CASSAVA DERIVATIVE (GARRI) IN THE SOUTH WEST OF NIGERIA
Fluctuation in prices of Agricultural products is inevitable in developing countries faced with economic depression and this, has brought a lot of inade-quacies in the preparation of Government financial budget. Consumer...
A MODEL FOR ASSESSING THE LEVEL OF AUTOMATION OF A MAINTENANCE DEPARTMENT USING ARTIFICIAL NEURAL NETWORK
With regard to adapting enterprise to the Industry 4.0 concept, the first element should be the implementation and use of an information system within a manufacturing company. This article proposes a model, the use of wh...
EFFICIENT NUMERICAL MODELLING OF FUNCTIONALLY GRADED SHELL MECHANICAL BEHAVIOR
Numerical analysis of the static bending and free vibration mechanical behavior of FGM are performed using the UMAT-USDFLD subroutines in ABAQUS software. Different combinations of geometries, mechanical loading and boun...