COMPARATIVE ASSESSMENT OF GRAPHIC MODELING SYSTEMS AND DESIGN AUTOMATION PRINCIPLES WHEN USING ENGINEERING PROFESSIONS BY UNIVERSITY UNDERGRADUATES
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 6
Abstract
In order to determine an effective graphical modeling system for introduction into the educational process in the disciplines of electrical engineering, an analysis of modern software products is carried out. The conclusion is made about the expediency of using the AutoCAD, “Compass” and Microsoft Visio software systems in the field of graphical modeling.
Authors and Affiliations
С. М. Голубєва, М. О. Морнева, А. С. Торопов
Keywords
Related Articles
- EP ID EP580221
- DOI -
- Views 56
- Downloads 0
APPLICATION OF B-SPLINES FOR DETERMINATION OF DEPENDENCE OF ISOBARIC HEAT CAPACITY OF AIR ON TEMPERATURE AND PRESSURE
The work is devoted to the development of the method of analytical representation of the specific isobaric heat capacity of air with the use of B-splines for the range of temperature and pressure variations typical for c...
METOD FOR CALCULATION OF NORMAL STRESSES OF FATIGUE LIFE OF PUMP-COMPRESSOR PIPES DURING THEIR OPERATION IN CURVILINEAR SECTIONS OF WELLS
It was established that in addition to the variable axial forces on a curved section of the well column tubing may be exposed to both static and cyclic bending moments. Last arise from additional tensile force of the wei...
PROTECTION OF ASYNCHRONOUS MOTOR WHICH CONTROLLED BY THYRISTOR STATION
In the article for the first time, it is proposed to use the structural scheme of the universal panel for protection of asynchronous motors with the power up to 400 kW. The panel allows blocking the range of a number of...
DEVELOPMENT OF AUTOMATIC SYSTEM FOR REGULATING THE POWER OF THE POWER UNIT OF THE WWER-1000 NPP IN THE MODE N
The power units of NPPs with WWER-1000 reactors, which are operated at four NPPs, are the most powerful in Ukraine. Due to the fact that there is a significant discrepancy between the generation and consumption of electr...
MODEL ORIENTED INFORMATION TECHNOLOGY OF DIAGNOSTICATION OF VAT IN THE CONDITIONS OF APRILINE INFORMATION INFRASTRUCTURE
The problem of ensuring universality and increasing the reliability of the diagnostic procedure is based on the construction of integral nonlinear dynamic models and their identification methods for creating effective in...