COMPARATIVE STUDY OF BEAMS BY USING DIFFERENT TYPES OF RETROFITING TECHNIQUES
Journal Title: International Journal of Civil Engineering and Technology - Year 2019, Vol 10, Issue 3
Abstract
The main aim of this study was to increase the strength of beams by using different types of jacketing techniques and checks the most cost-efficient methods. In this paper, the reinforced concrete (RC) jacketing and carbon fiber reinforced polymer jacketing was used for retrofitting the beams. In this research study, 100 mm thickness of RC jacketing is used in all four sides of beam and carbon fiber reinforced polymer (CFRP) of different thickness of sheet are used. The point load test is done on loading frame machine and check the crack, ultimate strength and comparing the results and cost of all different types of retrofit techniques for reinforced concrete. Analyses was also performed on ABAQUS software and then validation is done by comparing the deformation and stress behavior in ABAQUS and experimentally. It was observed that the RC jacketing strength increased 63% and 48.5% strength increase in CFRP. The test results show that the RC jacketing gain more strength then other jacketing methods and increase the flexural strength.
Authors and Affiliations
MANSI SAINI and ADITYA TIWARY
Keywords
Related Articles
- EP ID EP46699
- DOI -
- Views 163
- Downloads 0
PREFABRICATED HOUSING IN AUSTRALIA: IDENTIFYING THE FINANCIAL BARRIERS
Offsite-manufacture is considered to be the panacea to challenges in traditional construction methodology. Envisaged to address the contemporary issues of housing affordability and shortage in Australia, a great amount...
COMPARISON OF CELLULAR LIGHTWEIGHT CONCRETE WITH ADDITION OF PALM OIL MIDRIBS
Riau Province, Indonesia, has oil palm plantations that continue. Based on statistical data (BPS Indonesia, 2017) in 2016 the area of oil palm plantations in Riau province was 2,430,500 hectares and the potential for l...
PHYTOREMEDIATION EFFICIENCY OF DUCKWEED COMMUNITIES FOR MINING ENTERPRISES WASTEWATER TREATMENT FROM NITROGEN COMPOUNDS
The main purpose of the work was to determine the methods of mining enterprises wastewater secondary treatment from nitrogenous compounds. The chemical analysis of wastewater was carried out, and substances with exceed...
MINIMIZING OF SCOUR DOWNSTREAM THE OUTLETS OF THE BOX CULVERT
Local scour downstream the box culverts outlet may cause to a complete failure of the culvert structure. New research is employed to reduce the max scour depth downstream the outlet of the box culvert under a different...
EXPERIMENTAL ANALYSIS OF ENGINEERING PROPERTIES OF SOME SELECTED AFRICAN TIMBER SPECIES FOR SUSTAINABLE BUILDING DEVELOPMENT
This research work aims at the experimental analysis of engineering properties of some selected African timber species for sustainable building development. A welldesigned questionnaire distributed to the correspondents...