Comparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing
Journal Title: Polyolefins Journal - Year 2016, Vol 3, Issue 2
Abstract
In abiotic degradation the action of light radiation is one of the most important parameters, because polymers undergo degradation due to the action of light (natural or artificial). The aim of this study was to investigate the degradation rate for samples of polypropylene (PP) modified with an organic pro-degradant submitted to ageing in a natural environment and to accelerated ageing test. The degradation behavior of the samples exposed to the ageing processes was evaluated through changes in the degree of crystallinity (Xc ), surface morphology (Scanning Electron Microscopy) and molecular weight. The results indicated that for the modified polypropylene samples natural ageing led to a 42.3% reduction in the molecular weight and the surface morphology showed evidence of erosion. In the accelerated ageing process the UV radiation was stronger, which led to a 94.3% increase in the degree of crystallinity and micro-voids were present on the surface of the modified polypropylene.
Authors and Affiliations
Larissa Montagna, Ana Paula Testa Pezzin, Maria Madalena Forte, Ruth Marlene Santana
Keywords
Related Articles
- EP ID EP283161
- DOI 10.22063/POJ.1999.1340
- Views 126
- Downloads 0
Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products
Pyrolysis of high impact polystyrene (HIPS) waste has been investigated under different process parameters, such as temperature, heating rate and types of zeolitic catalysts to produce valuable liquid products. Liquid, g...
Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization
A two-dimensional (2D) single particle model for the copolymerization of propylene-ethylene with heterogeneous Ziegler-Natta catalyst is developed. The model accounts for the effects of the initial shape of the catalyst...
Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process
The commercial profile of the Amoco CD MgCl2 supported polypropylene catalyst is presented. The development, the unique method of preparation/production, with emphasis on particle morphology, and the parameters affecting...
Influence of diethyl zinc on ethylene-norbornene copolymerization
Ethylene-norbornene copolymers were synthesized with a homogeneous catalyst system based on bis(imino) pyridine iron with the addition of diethyl zinc (DEZ) as alkyd transfer agent to promote immortal copolymerization. T...
Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film
n this paper, a series of well-defined polyethylene-b-polytetrafluoroethylene diblock copolymers (PE–b– PTFEs) were prepared by a coupling reaction of hydroxyl-terminated polyethylene (PE–OH) and isocyanateterminated 1H,...