Comparing the performance of UV/Acetylacetone and UV/O3 processes for treatment of olive mill wastewater
Journal Title: Environmental Health Engineering and Management Journal - Year 2022, Vol 9, Issue 2
Abstract
Background: Olive mill wastewater (OMW) is characterized by its high organic content and refractory compounds. The aim of this study was to evaluate and compare the efficiency of UV/O3 and UV/ acetylacetone (UV/AcAc) processes for treatment of pretreated OMW by coagulation/microfiltration (C&M) process. Methods: In this study, a laboratory-scale UV plug flow reactor with ancillary equipment was fabricated. The experimental factors including initial pH (5-9), O3 dosages (1.5-4.5 g/h), and AcAc concentrations (0.01-0.03 M) were measured. For both processes, a reaction time of 120 min was considered. The effect of these variables on removal of wastewater contaminants including BOD, COD, TSS, turbidity, phenol, oil, and grease were investigated. Results: Results showed that raw OMW has a high load of pollutants and very low biodegradability (BOD5/COD = 0.12). In UV/O3 process, the optimal conditions were obtained at pH 8 and ozone injection at 4 g/h. The combined C&M-UV/O3 process removed 78.75% COD, 46.66% BOD5, 90.88% total phenol, 91.78% TSS, 99.14% oil and grease, and 98.38% turbidity, with promotion of BOD5/ COD from 0.12 to 0.33. In UV/AcAc process, the optimal conditions were achieved at pH 5 and AcAc concentration of 0.03 M. The combined C&M-UV/AcAc process removed 58.75% COD, 67.58% BOD5, 38.03% total phenol, 83.50% TSS, 93.65% oil and grease, and 95.00% turbidity, with promotion of BOD5/ COD from 0.12 to 0.22. Conclusion: The results showed that the UV/O3 process is completely superior to the UV/AcAc process for removal of OMW contaminants, as well as promoting the biodegradability of OMW.
Authors and Affiliations
Roya Radmehr , Mohammad Rafiee , Ahmadreza Yazdanbakhsh
Keywords
Related Articles
- EP ID EP705345
- DOI 10.34172/EHEM.2022.13
- Views 66
- Downloads 0
Removal efficiency of nitrate, phosphate, fecal and total coliforms by horizontal subsurface flow-constructed wetland from domestic wastewater
Background: Constructed wetlands are systems designed based on the utilization of natural processes, including vegetation, soil, and their associated microbial assemblage to assist in treating different types of wastew...
Specific absorption rate of different phone brands and health students’ awareness, attitude, and performance towards mobile phone hazards
Background: This study aimed to assess the specific absorption rate (SAR) due to the exposure to the radiations from different brands of cellphones, and to compare it with guideline values. The SAR is calculated using...
Comparison of hybrid regression and multivariate regression in the regional flood frequency analysis: A case study in Khorasan Razavi province
Background: Magnitude, rate and frequency of the stochastic and unexpected events are of great significance and importance in hydrology. Nowadays, for economic planning of the projects, the use of analytical methods of u...
Synthesis, characteristics, and photocatalytic activity of zinc oxide nanoparticles stabilized on the stone surface for degradation of metronidazole from aqueous solution
Background: The presence of antibiotics such as metronidazole in wastewater even at low concentrations requires searching for a suitable process such as advanced oxidation process (AOP) to reduce the level of pollutant...
Optimization of nitrogen and phosphorus removal from meat processing wastewaters using microalgal biofilms
Background: The conventional activated sludge processes are not able to completely treat the nitrogen and phosphorus compounds of meat processing wastewaters. Microalgal biofilm, which has the advantages of easiness and...