COMPARISON OF ABLATION RESISTANCE AND THERMAL CONDUCTIVITY OF C-PH AND CNT COMPOSITE LAMINATES
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
Supersonic aerospace vehicles which operate at very high speeds are supposed to sustain lots of heat due to skin friction. There is always a need for materials which are light in weight and show excellent thermal resistance. The current study compares the thermal conductivity and the ablation resistance of CNT and C-Ph laminates through series of experimental procedures.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP377015
- DOI -
- Views 76
- Downloads 0
Microstructure and Mechanical Properties of Hot Extruded Mg-3zn-1cu-0.7mn Alloy Produced by Powder Metallurgy
A novel alloy, Mg-3Zn-1Cu-0.7Mn is fabricated using blend-press-sinter powder metallurgy technique, and the microstructural and mechanical properties of the alloy have been analyzed. Also, the effect of the stress-reliev...
The Design and Analysis of Electric Vehicle Gearbox Casing
This study includes Design analysis on the use of the Finite Elements Analysis method for two speed electric busses gear boxes. When designing the gearbox, the strength of the transmission system is very important. Using...
The Effect of Ambient Temperature on Human Strength
Impact of environmental conditions like temperature is usually not considered in the measurement of work content analysis. However, to ensure healthy work conditions, it is imperative that studies on the effects of heat...
Study on Lean Tools Implementation in Various Indian Small and Medium Scale Manufacturing Industries
In present scenario, small and medium scale industries in India are implementing lean techniques hardly ever. Nowadays, the Government of India is also serving these kinds of small and medium scale industries in their le...
ANALYSYS OF TEMPARATURE & HEAT FLUX OF COATED AND NON-COATED PISTONS BY USING (YSZ) MATERIAL
The greater parts of the buyers of transportation utilize petroleum and diesel as fuel. Because of the expansion in the use of these items, there is need of increment in productivity of power producing machines. The perf...