Comparison of different Combining methods and Relaying Techniques in Cooperative Diversity
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 2, Issue 7
Abstract
An ad-hoc network with a sender, a destination and a third station act-ing as a relay is analyzed. The channels are modeled containing thermal noise, Rayleigh fading and path loss. Different combining methods and diversity protocols are compared. The amplify and forward protocol shows a better performance than the decode and forward protocol, unless an error correcting code is simulated. To combine the incoming signals the channel quality should be estimated as well as possible. Information about the average quality shows nice benefits, and a rough approximation about the variation of the channel quality increases the performance even more. What-ever combination of diversity protocol and combining method is used second level diversity is observed. The relative distances between the relay and the stations has a large effect on the performance.The aim of this project was to study the characteristics and utility of relaying in future wireless systems. The focus was mainly on the cooperative principles and relay selection in the case of mobile multihop relay structures. This project also included the study of IEEE 802.16j, the multihop relay specification for 802.16 or Wimax standard. It was an interesting assignment to study the practical realization of a concept that has evolved over a couple of years. I studied some relevant research papers (listed in the references section), modeled some simulation scenarios based on the results of these papers and gained a invaluable insight on some of the topics.
Authors and Affiliations
Swati Singh Tomar
Keywords
Related Articles
- EP ID EP111830
- DOI -
- Views 80
- Downloads 0
DETERMINATION OF OPTIMAL LOCATION OF SVC CONTROLLER DEVICES IN ELECTRIC TRANSMISSION SYSTEM BY USING PSO METHOD
This paper aims to identify the optimal location for the installation of SVC controller using Particle Swarm Optimization (PSO) method to mitigate small signal oscillations in a multi machine power system reducing...
EXPERIMENTAL ANALYSIS AND OPTIMIZATION OF EDM ON AA6061 USING TAGUCHI TECHNIQUE
Electro Discharge Machining (EDM) is an extremely noticeable machining process among newly developed non - traditional machining techniques are “difficult to machine” conducting materials such as heat treated tool steel...
AN ANALYSIS ON EFFICIENT PROJECT-MANAGEMENT BY USING PRIMAVERA
Project Controlling uses the data of collection, recording and reporting information to bring Actual performance to planned performance. As larger the as more the complexity is in exchange information on timely basis ge...
Optimisation And Method
One of the most critical factors in developing pharmaceutical drug substances and analytical test methods used to analyze pharmaceutical products should generate valid and meaningful data in terms of reliability, accur...
Establishing Core Hardness by Induction Hardening Process for Crankshaft
The main purpose of this paper is to identify the need for Surface Hardening in Crankshafts and establishing Induction Hardening as the most practically viable process for the same. Crankshaft is one of the large...