COMPARISON OF DIFFERENT TYPE OF FRICTION ANGLE IN KINEMATIC ANALYSIS

Journal Title: Malaysian Journal of Geosciences - Year 2018, Vol 2, Issue 1

Abstract

The kinematic analysis is a method in determining the types of failure modes for a rock slope. This analysis is referring to the motion of bodies without reference to the forces that cause them to move and depending on the relationship between slope geometry and internal friction angle of discontinuity plane or failure. The selection of friction angle type for kinematic analysis is an important aspect in term of cost, availability and reliability of testing, equipment and result. Then, kinematic analysis has been conducted by using the peak, basic and conventional friction angles values from triaxial test, tilt test and assumption, respectively for ten (10) selected slopes. Finally, the cheaper, most available and reliable result was shown by the basic friction angle and recommended for kinematic analysis.

Authors and Affiliations

Ismail Abd Rahim, Junaidi Asis, Mohamed Ali Yusuf Mohd Husin

Keywords

Related Articles

A GEOSPATIAL- STATISTICAL APPROACH TO ALIENATE PRIORITY AREA OF UPPER WATERSHED OF RIVER SUBARNAREKHA USING MORPHOMETRIC ASSESSMENT FRAMEWORK

Micro-watershed planning and management play an important role in addressing the issues and challenges of water scarcity of a region. The assessment of hydrological framework using morphometric calculation and GIS techno...

TIME SERIES ANALYSIS OF SUBSIDENCE IN DHAKA CITY, BANGLADESH USING INSAR

Despite existing literature suggesting that Dhaka City, Bangladesh is undergoing subsidence, few researches have been carried out to actually measure the subsidence rate. Previously conducted studies either do not provid...

PERMEABILITY-POROSITY TRENDS IN CAWC RESERVOIR SANDS IN THE NIGER DELTA NIGERIA, USING WELL-LOG DATA

Reservoir characteristics analysis in the onshore Cawthorne Channel (CAWC) oil field, Niger Delta is here presented. The aim of the research was to assess reservoir properties and their relationships. A suite of geophysi...

DELINEATION OF SUBSURFACE STRUCTURES IN TOJA FIELD IN THE NIGER DELTA USING WELL-LOGS AND SEISMIC DATA

The subsurface structures delineation of TOJA Field southwest Niger Delta using well-log and seismic data is here presented. The reflectivity seismic amplitude and acoustic impedance, spectra decomposition volume derivat...

LANDSLIDE SUSCEPTIBILITY ANALYSIS (LSA) USING WEIGHTED OVERLAY METHOD (WOM) ALONG THE GENTING SEMPAH TO BENTONG HIGHWAY, PAHANG

This study focused on the Landslide Susceptibility Analysis (LSA) of the Karak highway, which link the Genting Sempah to Bentong area, Pahang. The physical relief of the study area is largely flat to undulating and moder...

Download PDF file
  • EP ID EP402478
  • DOI 10.26480/mjg.01.2018.38.41
  • Views 88
  • Downloads 0

How To Cite

Ismail Abd Rahim, Junaidi Asis, Mohamed Ali Yusuf Mohd Husin (2018). COMPARISON OF DIFFERENT TYPE OF FRICTION ANGLE IN KINEMATIC ANALYSIS. Malaysian Journal of Geosciences, 2(1), 38-41. https://europub.co.uk/articles/-A-402478