COMPARISON OF THE CALCULATIONS RESULTS OF HEAT EXCHANGE BETWEEN A SINGLE-FAMILY BUILDING AND THE GROUND OBTAINED WITH THE QUASI-STATIONARY AND 3-D TRANSIENT MODELS. PART 2: INTERMITTENT AND REDUCED HEATING MODE
Journal Title: Civil and Environmental Engineering Reports - Year 2017, Vol 1, Issue 24
Abstract
The paper provides comparative results of calculations of heat exchange between ground and typical residential buildings using simplified (quasi-stationary) and more accurate (transient, three-dimensional) methods. Such characteristics as building’s geometry, basement hollow and construction of ground touching assemblies were considered including intermittent and reduced heating mode. The calculations with simplified methods were conducted in accordance with currently valid norm: PN-EN ISO 13370:2008. Thermal performance of buildings. Heat transfer via the ground. Calculation methods. Comparative estimates concerning transient, 3-D, heat flow were performed with computer software WUFI®plus. The differences of heat exchange obtained using more exact and simplified methods have been specified as a result of the analysis.
Authors and Affiliations
Anna STASZCZUK
AEROPHYTIC CYANOBACTERIA AS A FACTOR IN THE BIODEGRADATION OF TECHNICAL MATERIALS ON EXTERNAL BUILDING WALLS
A study conducted at the Institute of Environmental Engineering, University of Zielona Góra showed the presence of 4 species of aerophytic cyanobacteria in the biological material sampled from the external building wall...
BENDING RESISTANCE OF METAL-CONCRETE COMPOSITE BEAMS IN A NATURAL FIRE
In this paper, the bending resistance of three metal-concrete composite beams was compared in real car fires in an open car park. Steel and concrete composite beams are often used for the construction of ceilings in mult...
SEDIMENTS CONTAMINATION WITH ORGANIC MICROPOLLUTANTS: CURRENT STATE AND PERSPECTIVES
This study focused on the sediment contamination with some organic micropollutants based on the monitoring data together with available literature in Poland. The following persistent organic pollutants (POPs): polycyclic...
STATE OF THE ART IN TECHNOLOGIES OF THE BIOGAS PRODUCTION INCREASING DURING METHANE DIGESTION OF SEWAGE SLUDGE
At present many WWTPs are focused on increasing quantity of biogas generated during sewage sludge processing. Various disintegration methods can be used for this purpose – thermal heating, ultrasonic disintegration, chem...
GEOPOLYMERS IN CONSTRUCTION
Within the framework of quests of supplementary and „healthier” binders to the production of concrete followed the development of geopolymers in construction. However the practical application of these materials is still...