Comparison of transverse strength and impact strength of a high impact heat cure denture base resin with that of a conve
Journal Title: Scientific Journal of Review - Year 2015, Vol 4, Issue 2
Abstract
To compare the transverse strength and impact strength of a high impact heat cure denture base resin with that of a conventional heat cure denture base resin reinforced with E-glass and polyethylene fibers. To investigate the relative efficacy of addition of E-glass and polyethylene fibers in improving the impact and transverse strength of a commercially available conventional heat cure resin and compare that with high impact heat cure denture base resin. 80 het cure denture base resin blocks samples; 20 of conventional heat cure denture base resin (DPI India), 20 of high impact heat cure denture base resin (Trevalon High Impact, Dentsply International, Germany), 20 of E-glass fiber(India chemicals limited, Ahmadabad, India) reinforced heat cure denture base resin and 20 of polyethylene (India chemicals limited, Ahmadabad, India) reinforced heat cure denture base resin respectively) were tested with Lloyd’s instrument material (Milano, Italy Model No. LR 100K) for transverse strength and Charpy digital impact tester (Milano, Italy Model No. IZOD 44) for impact strength. There was significant increase in transverse and impact strength values of conventional heat cure denture base resin reinforced with E-glass and polyethylene fibers. However transverse strength of high impact heat cure denture base resin was still higher than conventional heat cure denture base resin reinforced with E-glass and polyethylene fibers.
Authors and Affiliations
Dr. U. Iqbal*| Lecturer, Department of Prosthodontics, Govt. Dental College & Hospital, Srinagar, J&K, INDIA., T. A. Naqash| Resident, Department of Prosthodontics, Govt. Dental College & Hospital, Srinagar, J&K, INDIA.
Keywords
Related Articles
- EP ID EP197
- DOI 10.14196/sjr.v4i2.1827
- Views 543
- Downloads 33
An analysis of abortion in Iranian law and Imamia Fiqh: a cursory look at international law
The pregnancy is considered to be a beautiful and pleasing event from a medical and social perspective, and conversely abortion is seen as a social problem in all human societies, and a universal inevitable phenomenon, p...
Introduction to calcareous algae in Esfiyukh Mountain
In this research the biostratigraphy in Esfiyukh Mountain (5km of North-east of Torbat-e-Heydarieh) is studied for the first time. Thedeposits in this section are about 175 meters thickness; lithology consists ofalternat...
Conceptual instrumentation of washing machine for conformity to the Islamic laws of Syarak
The concept of today’s washing machine that uses control technology to clean clothing is based on clothing weight factor proportionately to the amount of water used irrespective of the nature of the contaminants. However...
Studying the geometric parameters, stability of isomer and IR frequencies in Enaminone compounds with the DFT and HF met
Enaminones are the large category of chemical compounds that their numerous applications caused to be interested by researchers and scientists in two important experimental and theoretical forms. Calculating chemistry...
Comparing the rate of applying knowledge management in guidance schools of education districts 1 and 4 in Tabriz
This study aimed to compare the application of Knowledge Management in Education, Tabriz guidance schools districts 1 and 4 was performed. Research methods, descriptive - survey, and the population is 392 people of pri...