Comparison of Various Methods for Orbital Measurements Processing
Journal Title: International Journal of Aeronautical Science & Aerospace Research - Year 2019, Vol 6, Issue 3
Abstract
The application of joint measurements processing in updating satellite orbits faces the necessity of correct accounting for random perturbations. In the early 70-ies it was suggested to improve the least square technique (LST) based on accounting for random perturbations in "weighing" the measurements. This improvement was called the method for Optimal Filtration of Measurement (OFM). The comparison of the accuracy of estimates, obtained with using the LST (with extension and without extension of the state vector), as well as the OFM method, was performed. It was shown that, in the presence of perturbations, the application of the OFM method provides the best accuracy.
Authors and Affiliations
Andrey I Nazarenko
Keywords
Related Articles
- EP ID EP516249
- DOI -
- Views 71
- Downloads 0
Finite Element Analysis and Vibration Testing of a Simple Replicate Beam-Type Aircraft Wing with and without Secondary Structure Attached
Ground vibration testing (GVT) is one of the most critical testing procedures for an airplane certification. With proper GVT, analysts can determine the stiffness distribution, natural frequencies, mode shapes and struct...
Study the Performance of an Organic Rankine Cycle for Thermal Absorption and Recovery from the Scramjet Cooling Heat
An Organic Rankine Cycle (ORC) for thermal absorption and recovery system is proposed for cooling scramjet. The heat which must be taken away by fuel coolant from cooling scramjet is converted to other forms of energy. T...
Qualification of Composite Structure for Cubesat Picosatellites as a Demonstration for Small Satellite Elements
The present work describes the design, structural analysis, and qualification by analysis and experimental validation of the 1st Greek cube-satellite developed at the University of Patras (UPSat - University of Patras Sa...
Failure Oriented Accelerated Testing (FOAT), Boltzmann Arrhenius Zhurkov Equation (BAZ), and their Application in Aerospace Microelectronics and Photonics Reliability Engineering
The best engineering product is, in effect, the best compromise between its cost, time-to-market and reliability. No successful compromise can be achieved nor can an adequate performance of an electronic or photonic prod...
Flutter Analysis of A Laminated Composite Plate with Temperature Dependent Material Properties
This study is concerned with the aeroelastic behavior of a laminated composite rectangular plate with temperature dependent material properties. Plate equations for homogenous linear elastic material and small deformatio...