COMPUTATIONAL ANALYSIS OF A SEDAN USING COMPUTATIONAL FLUID DYNAMICS SOFTWARE
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
This paper presents computational investigation of air flow over a sedan. This work presents a computational method to deduce the pressure and velocity beneath sedan. The study is done on two dimensional model of Honda S 2000 with different diffuser angles in creo parametric and analyzed in ANSYS FLUENT to obtain the surface velocity and pressure distribution. It is found that pressure and velocity are influenced by the angle of diffuser. The fluid used for this purpose is air.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP377245
- DOI -
- Views 73
- Downloads 0
CHARACTERIZATION OF ADDITIVE MANUFACTURED ABS AND NATURAL ABS SPECIMENS
Additive Manufacturing (AM) is a Rapid Prototyping technique. It is used for producing any real complex parts from the desired 3D CAD models. It can also manufacture prototypes. Additive Manufacturing can utilize raw mat...
Comparison of Liquid Desiccants for Air Cooling Systems Using Wetted Wall Column
Desiccant dehumidification refers to the use of chemical for absorption of water vapor to dehumidify air, and thus reduce the latent cooling load in a building’s Heating, Ventilation and Air-Conditioning system. There ar...
A Parametric Analysis of Deformation of Workpiece in Closed Die Forging
Under filling and folding are two major defects, resulting in defective parts at the forging stage or failure during service life. Folding may act as a potential starting point, for crack initiation and under filled comp...
A Review of Various Technologies Used for Biodiesel Production
The energy crises, mainly the rapid depletion of fossil fuels are considered as an important global problem. Thus it necessitates to search for an alternative source of fuel to meet the energy demand. Energy can be produ...
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...