Computer-Aided Manufacturing Processes: A Comparison AndDecision Model For Selecting An Analytical Or Numerical Approach To A Drawing Design
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 4
Abstract
This article’s main function is to analyze the possibilities and applications of numericalcomputational analysis (in this case, the Abaqus software) to drawing considering both problem solving and project definition related to the manufacturing process. Therefore, this work starts with a comparison between analytical and numerical analysis of the process, mentioning the advantages and disadvantages, as well as the indicated application of each; and with a presentation of the Abaqus software potential and limitations. Next, a theoretical case study is proposed to better analyze this problem, testing the differences between the two methods (analytical and computational) of a specific problem solving in drawing process. The results are, finally, compared generating further conclusions.
Authors and Affiliations
Moisés Xavier, Tamires Alves, Pedro Peixoto, Francisco Dos Santos, Gustavo Rodrigues
Keywords
Related Articles
- EP ID EP438412
- DOI 10.9790/1684-1504023744.
- Views 57
- Downloads 0
Water Quality Assessment of Brahmani River At Talcher City, Odisha (A Case Study)
Water, food, energy and the environment have got intertwined in a spiral of decline and degradation .The challenge is to slow the spin and reverse the direction. The world’s thirst for water is likely to become one of th...
Development of Self Compacting Concrete Using Industrial Waste As Mineral And Chemical Additives
This paper reports a research that investigated the application of industrial waste materials as mineral and chemical additives in the production of Self Compacting Concrete. The flow characteristics of the Self Compacti...
Significance of Sampling Location and Percentage Replacement of Additives on Index Properties of Stabilised Subgrade Soils: A Statistical Approach
Laboratory tests were conducted on soil samples collected from three locations namely, Osu, Ajebandele and Aba-gbooro, in Osun state. Some geotechnical properties of soils were examined, thereafter steel slag (SS) collec...
A computational study on nonlinear curve-fitted equation for estimating gasoline –engine exhausts emissions
.
Challenges facing Internship Programme for Engineering Students as a learning experience: a Case Study of Debre Berhan University in Ethiopia
Internship is a period of time in which students can gain work experience related to what they have learned in their study programme. Debre Berhan University introduced internship programme to provide students with a smo...