Concerning the Automatic Computation of the Electrical Stresses in the High Voltage Substations during the Transient Regimes
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
This paper deals with an automatic computation program using a Matlab graphical user interface GUI useful to compute electrical stresses which appear in the high voltage substations; that means the parameters computation of the short circuit currents or transient recovery voltages which appear during the fault regimes in the high voltage networks. The numerical evaluation of the electrical stresses is carried out for the high voltage substations from ST Craiova such as transmission lines Filiasi, Slatina, Turnu Magurele, Isalnita. The parameters of the shortcircuit currents or over voltages are computed and graphical display of their variation in time can be available also. The influence of the high voltage network characteristics, such as the line length or the phase angle of the source voltage on the computed parameters level is pointed out. The Matlab GUI is developed based on the automatic computation program, which was achieved within the research contract with the Transelectrica SA Transport Branch Craiova. The partial results obtained within the above mentioned contract were previously presented in the various papers. Also, the computation algorithm is based on the results presented in the references of this paper. This GUI can be applied for any other high voltage substation whose rated parameters are known.
Authors and Affiliations
Maria Brojboiu, Virginia Ivanov
Keywords
Related Articles
- EP ID EP264068
- DOI -
- Views 125
- Downloads 0
Study of Indirect Current Control Methods for Urban Traction Active DC Substations
Although the high power DC traction substations are using 12 pulse rectifier which have lower distortion than the classical 6 pulse rectifier, considering the high power, the reactive and harmonic components of the...
COMPUTER AIDED ANALISYS OF INDUCTION MOTOR
Sometimes the digital control system of an electrical machine has some parameters that are unknown or they are known, but can vary in time. The control circuits with self-tuning controllers are using parameter identifica...
The Analysis of Biphasic Short Circuit Regimes to Doubly-fed Induction Generators Connected to a Power System
The paper presents analysis of the biphasic short circuit regimes at the terminals of doubly fed induction generator connected to the national power system of the Republic of Moldova. Research related to connecting wind...
THE STUDY OF ELECTRICAL PARAMETERS AND THE EXHAUST GAS ANALYSIS FOR A DOUBLE SPARK PLUG
The spark produced by a classical spark-plug does not always assure a fast and complete combustion of an air/fuel mixture into the combustion chamber of a thermal engine. This is the reason why we have done a long series...
MODULAR TRANSVERSAL FLUX TUBULAR MACHINE – PRESENTATION AND PROGRESS ACHIEVEMENTS
This paper proposes an interesting new type of tubular machine that can work like a tubular motor or a tubular generator. The machine’s topologies for both operating regimes are presented here. In the paper a prototype o...