Configuration Selection Based On Lifecycle Cost Of Subsea Production System: Case Of Indonesia Deepwater Field
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2018, Vol 2, Issue 2
Abstract
Subsea tie back systems are important parts of oil and gas production project. The decision to select a subsea tie-back configuration with the objective goal of lowest lifecycle cost can be configured in multiple ways based on the field specifications and operator’s approach to operation. This paper presents an Analytic Hierarchy Process (AHP) method to determine economical levels of subsea tie-back wells configuration, based on lifecycle cost of subsea deepwater production systems with respect to wells number alternative. Field reservoir located in deepwater of eastern Indonesian with the depth of 1400 meters and field life 40 years is studied. From this study, it is identified that the most economical configuration in subsea production systems: satellite tie-back configuration to develop small field with 6 numbers of wells; for 12 numbers of wells, template subsea tie-back configuration is the best.
Authors and Affiliations
Christoffel. F. B. Sa’u, Daniel. M Rosyid
Keywords
Related Articles
- EP ID EP333847
- DOI 10.12962/j25481479.v2i2.3648
- Views 204
- Downloads 0
Analysis of Engine Propeller Matching of DC Motor as a Main Propulsion
The development of ship always searches through the most benefits system for reducing costs of propulsion system without increase pollution. Diesel propulsion system or also known as conventional propulsion system is eff...
Analysis Effect of Duct Length– Nozzle Diameter Ratio and Tip Clearance Variation on the Performance of K-Series Propeller
One type of ship propeller is a ducted propeller. Ducted propellers are propellers with sheath or duct that can increase thrust on the propeller and useful for directing the flow of water that will pass through the Prop...
Flat Top Barge 300feet Design Using Portable Dynamic Positioning System
Portable Dynamic Positioning System has not commonly applied to the ship, especially on barge. Besides for Dynamic Positioning function, the system can be used as ship's main propulsion. By using this system, the ship ab...
Designing Passive Harmonic Filter of Electric Propulsion System on Tanker Ship
Harmonic is a frequency defect that have some negative effect to the electrical network system. In a ship, electrical network system are interconnected to each other to another electrical consumer device. The effect will...
Development of Marine and Coastal Tourism Based on Blue Economy
Marine and coastal tourism as one of the largest segments of the maritime economy sector, as well as the largest component of the tourism industry, often leads to controversy over environmental impact and compatibilit...