Conformance Testing of Non-PoE Devices in a PoE Enabled Network

Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6

Abstract

Ethernet for Data transfer in Computer Networks is ubiquitous. However some recent advancements in DC Powering have enabled transporting power and data simultaneously, over the same Ethernet cables. This technique is known as Power over Ethernet (PoE). However there are few challenges though, the first and the foremost being that of operational safety of the devices which are not PoE compliant. It needs to be noted that IEEE 802.3af standard specifies a 15W of PoE power at 48Volts DC which if connected to an incompatible device, may end up damaging it, permanently. Hence it is important that a PoE Equipment is tested and confirmed that it allows for safe and reliable operation of non-compliant devices. Failure to confirm this may have a catastrophic impact on the network that could range from a network crash to an imminent fire hazard. This paper discusses important tests which need be performed to ascertain that the PoE equipment being connected in the network will allow for safe and reliable operation of incompatible or legacy network devices. A LTSPICE simulated PoE network has been considered to carry out these various tests as well as for the verification of the safety features incorporated in the PSE-PD combination and its compliance to IEEE 802.3af standard. The observations and results are tabulated and conclusions are drawn.

Authors and Affiliations

Chodankar Deepak P

Keywords

Related Articles

Water Quality Analysis of Waste Water: A Case Study of Khan Sarover Treatment Plant, Patan, Gujarat

The study carried out on Khan Sarovar treatment plant’s water deals with the influence of environmental parameters on the ground water quality and water bodies. The waste water of approximately 60,00,000 liters’ quantity...

Empathy Improvement through Roleplaying Canvas in Education and Innovations

The Gujarat Technological University initiated a movement of learning engineering by applying the approach of design thinking across all the branches through curriculum since the year 2014. The initial efforts were focus...

An Improved PDPWM for a Modular Multilevel Inverter used for Micro Grid

This modulation method is based on selective virtual loop mapping, to achieve dynamic capacitor voltage balance without the help of an extra compensation signal. The concept of virtual sub module (VSM) is first establish...

Secured Video Streaming and Video Sharing in Mobile Networks using Cloud

The tradition of videos over mobile networks has been increasing staggeringly in such however that the wireless networks cannot keep up with the rigorous traffic. Poor quality of videos (long buffering time, intermittent...

Security Analysis in Different Areas using Crime Data

This paper talks about hotspots and use of k means clustering for crime pattern detection. It first identifies significant attributes in the database. Unlike other papers, it then gives weights to attributes in the data...

Download PDF file
  • EP ID EP224439
  • DOI -
  • Views 70
  • Downloads 0

How To Cite

Chodankar Deepak P (2017). Conformance Testing of Non-PoE Devices in a PoE Enabled Network. GRD Journal for Engineering, 2(6), 64-71. https://europub.co.uk/articles/-A-224439