Contact Stress Analysis and Stress Optimization of Spur Gear
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 6
Abstract
The gears for transmission develop stresses at the mating positions over the teeth. A pair of spur gear teeth is generally subjected to two types of cyclic stresses as bending stresses and contact stresses. These stresses are proportional to the amount of power transmitted while the design could offer favourable or adverse conditions for generations of the same. This dissertation work would identify the magnitude of the stresses for a given configuration of a gear transmitting power while trying to find ways for reducing stress and weight of the gear. Magnitude of mass and stress optimization could be the key parameters of assessing this work.
Authors and Affiliations
Rahul Kamble, Prof. S. U. Ratnaparkhi
Keywords
Related Articles
- EP ID EP24692
- DOI -
- Views 387
- Downloads 14
A Review: Design of 16 bit Arithmetic and Logical unit using Vivado 14.7 and Implementation on Basys 3 FPGA Board
The paper primarily deals with review for the construction of arithmetic Logic Unit (ALU) using Hardware Description Language (HDL) using Xilinx Vivado 14.7 and implement them on Field Programmable Gate Arrays (FPGAs) t...
Effect on Flexural Strength by using Glass Fibre and Metakaolin in Concrete
Concrete is weak in tension. The introduction of fibres with 10% fixed metakaolin by the weight of cement in concrete have significantly improves its Flexural strength. The use of different types of fibres & Metakaolin...
Effect of Yogic Exercises on the Physical Fitness Components of Handball Players
Yogic exercises not only increase the general strength but also tone up the muscles because these exercises stretch out the muscles and due to their slow stretch and hold nature along with breathing mechanism improves t...
Memory Protection for Encoders in OLS Codes
Error correction codes (ECCs) are commonly used to look after memories next to errors. The proposed technique we are detect the one or more errors and to correct on its own bit error. Among ECCs, Orthogonal Latin Square...
A Review on LL (1) Parser
In any programming language, parsing is performed after scanning each and every lexical unit of the program. Lexical unit of PL domain is any keyword, identifier, constant, operator, etc. Once all the units have been id...