CONTRIBUTION TO THE STUDY OF FLUID FLOW IN A STIRRED TANK BY INTRODUCING MICROPARTICLES
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
Micro particles are today a major technological and economic issue. They enable very promising innovations in many fundamental areas such as: health, energy or industry. Despite the numerous studies devoted to hydrodynamics in agitated tanks, there is still a glaring lack of information on the temporal evolution of fluid flow properties. The knowledge of this dependence has been often crucial, for example, in the food, chemical, biochemical or petrochemical industry is carried out in tanks or in mechanically agitated reactors. The micro particles are colloidal solutions composed of particles of micrometric size suspended in a liquid. Their astonishing thermal properties have been the subject of intense investigation during the last decade. It is proposed in this work to study the influence of the concentration of micro particles (al2o3, cuo, etc.) Dispersed in a base fluid on the hydrodynamic fields of fluid in flat-bottomed cylindrical and non-quenched fluid provided with a stirrer. Anchor type was undertaken by numerical simulation using the fluent cfd 6.2.13 based on the finite volume discretization method of the navier stokes equations (uvp) equations and the energy equation. We aim at a synthesis of the simulated system by comparing the power consumed by the micro particle technique.
Authors and Affiliations
SEGHOUANI N, RAHMANI L, BENMOUSSA A, SEGHIER1 O, TAFRAOUI A, DRAOUI1 B
A Novel Approach to Improve WEDM Performance on Inconel718, by Using Small Diameter Zinc Coated Wire
In this paper, a novel approach to increase the wire electrical discharge machining performance by using small diameter wire is presented. As wire in wire electrical discharge machining (WEDM) is the only externally adde...
MODERN PLANT MAINTENANCE AND RELIABILITY MANAGEMENT METHODS – A REVIEW
The period from the 1990s has seen a large body of work in the areas of Plant Maintenance and Reliability Management. While strategies like RCM and TPM are popular and well known, there is also a large body of work that...
Optimization of Process Parameters on Thrust Force and Delamination Factor in Drilling of Carbon Fiber Reinforced Composites
The major objective of this work was to investigate a statistical model, based on Taguchi technique and to estimate the quality of drill in CFRP composite material prepared by hand layup technique. The design of experime...
Evaluation of Interlaminar Fracture Toughness of Glass Fiber - Epoxy-Modified Composite Materials
Developing efficient wind mill blades with high toughness and good fatigue life is one of the main engineering challenges for wind energy sector globally. FRP is commonly used in aerospace, manufacturing of auto ancillar...
INVESTIGATION ON EFFECT OF TIN COATED AND UNCOATED HSS TOOLS FOR MACHINING AA6061
Aluminum alloy 6061 was widely used in aircraft structures, yacht construction, automotive chassis, etc., For machining the Aluminum alloy 6061 high-speed steel (HSS) end mill cutters were used. When carbide end mills we...