Convective Heat Transfer from a Circular Tube with Variable Dimple Dimension
Journal Title: Engineering and Technology Journal - Year 2025, Vol 10, Issue 04
Abstract
This paper provides an experimental study of forced convection heat transfer from water flow in a pipe that has a hemispherical dimple where the dimple is towards the inside of the pipe. The heat provided by the heating wire wrapped around the pipe is conducted by a constant flux of electric current. The heat from the pipe wall is received by the water flow in the pipe. On the circumference of the pipe, three rows of dimples are made along the length of the pipe and the variations in diameter dimple dimension are d* = 0.21, 0,42 and 0,63. Variations in flow discharge expressed in the Reynolds number produce laminar and turbulent flow. The results show that there is an increase in temperature along the length of the pipe, the convection coefficient increases with increasing Reynolds number and heat transfer increases with increasing Reynolds number.
Authors and Affiliations
Jatmikojati F. H. , Diaz M. , Havid R. A. , Diah Kusuma Pratiwi ,Kaprawi S. ,
Keywords
Related Articles
- EP ID EP764841
- DOI 10.47191/etj/v10i04.22
- Views 23
- Downloads 0
Possibility of Removing Phosphates from Activated Charbon Made from Date Kernels
Phosphates in natural waters and whatever their origin, promote the formation of algae, reduce dissolved oxygen and reduce biodiversity in aquatic ecosystems. At high doses, phosphate salts can cause health problems. The...
IMPROVING THE COMPRESSIVE STRENGTH OF RUBBER MODIFIED CONCRETE USING SYNTHETIC RESIN
It has been realized that the generation of solid waste and the disposal problem related to it is a standout amongst the most vital issues which our human progress is confronting in present era. The generation of non-bio...
The Environmental Impacts of Post-Disaster Rehabilitation and Reconstruction Facilities in Garut Regency-Indonesia
Garut Regency is referred to as a miniature natural disaster in Indonesia. This is because Garut Regency is surrounded by active mountains with topographic characteristics of the northern part consisting of plateaus and...
CRUSHING MACHINE DESIGN FOR WOOD WASTE UTILIZATION USING AXIOMATIC DESIGN METHOD.
The increased number of furniture orders led to a significant amount of material waste. Bahana Raya produces 5-7 m3 of multiplex and blockboard waste. Multiplex waste in the form of lumber and wood chips has been solely...
KINETICS LEACHING STUDY OF URANIUM FROM ALGERIAN PHOSPHATE BY SULFURIC ACID
The kinetics of dissolution of an Algerian phosphate in sulfuric acid has been investigated in the presence of hydrogen peroxide (H2O2) as oxidant. The effect of different parameters such as leaching time, sulfuric acid...