Convective Heat Transfer Model through Annular Finned Evaporator of a Cold Storage Using Taguchi Regression, S/N Ratio and ANOVA Analysis
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 6
Abstract
To overcome the energy crisis and increase of cost of electrical energy to operate the cold storage various design of experiments are done to optimize different control factors of a cold storage evaporator space inside the cold room. Here we have use annular fin to maximize the heat absorption by evaporator. Taguchi orthogonal array with regression analysis have been used as a design of experiments. The control factors are Area of the evaporator with annular fin(A), temperature difference of the evaporator space (dT), and relative humidity inside the cold room(RH). The Taguchi S/N ratio analysis have used as an optimization technique. Larger the better type S/N ratio have used for calculating the optimum level of control parameters, because it is a maximization problem. Analysis of variance ANOVA was also performed on the test results to find out the significant control factors.
Authors and Affiliations
Dr. N. Mukhopadhyay, Tapan Mondal
Keywords
Related Articles
- EP ID EP391496
- DOI 10.9790/9622-0706063343.
- Views 149
- Downloads 0
Survey Paper on Image Compression using Block Truncation Coding Technique
Text and image data are important elements for information processing almost in all the computer applications. Uncompressed image or text data require high transmission bandwidth and significant storage capacity. Designi...
Post Earthquack Slope Stability Analysis of Rubble Mound Breakwater Amin Moradi1 ,
Rubble mound breakwaters are structures built mainly of quarried rock. Generally armourstone or artificial concrete armour units are used for the outer armour layer,which should protect the structure againist wave attack...
Locating Facts Devices in Optimized manner in Power System by Means of Sensitivity Analysis
This paper presents a new method to find the optimal location of facts devices by analyzing sensitivity . The optimal location and capability of Static Var Compensator (SVC) and Thyristor Controlled Series Capacitor (TCS...
Assessment of Reutilization of Various Categorical Waste from Construction Site
Construction and demolition waste is one of the important category of solid waste. Many recreational and building projects contribute towards generation of ample quantity of waste produced on these respective sites. Reut...
Structural Changes in the Surface Layer of Deep Rolled Samples Due to Thermal Loads
Deep rolling processes initiate plastic deformations in the surface layer. The local characteristics of deformation are dependent on the induced stress expressed by the local stress tensor. Equivalent stresses above yiel...