Copper alloy coatings manufactured by oxy-fuel thermal spray onto a porcelain substrate
Journal Title: TecnoLógicas - Year 2015, Vol 18, Issue 35
Abstract
A coated system consisting of a ceramic substrate and a coating of a copper alloy was developed in order to provide electrically conductive properties to specific surface of the substrate. The coatings were elaborated by oxy-fuel thermal spraying processes. The best way to prepare the surface of the substrate was previously determined to achieve a sufficient adherence of copper alloy particles on the ceramic substrate. In order to manufacture the coatings an Eutectic Castolin 21071TM powder was used, the oxy-fuel flames were produced from two different volumetric acetylene-oxygen ratios (1:1.15 and 1:2.5) obtaining a reducing and oxidizing flame respectively. The effect of surface preparation of the substrate, the coating thickness and the energy of the flame on the structure and coating adhesion wer
Authors and Affiliations
Daniela Soto-Martínez, Carolina Parra-Velásquez, María E. López-Gómez, Carlos F. Vásquez-Jiménez, Fabio Vargas-Galvis
Keywords
Related Articles
- EP ID EP402312
- DOI 10.22430/22565337.190
- Views 98
- Downloads 0
Evaluation of a statistical model for estimating the solar radiation in Magdalena, Colombia
The global solar radiation is an important meteorological parameter for understanding the biochemical processes in the environment. Their measurement is complex and requires a high cost of installation, operation and mai...
Numerical and experimental validation with bifurcation diagrams for a controlled DC–DC converter with quasi-sliding control
This paper presents a stability analysis of a buck converter usinga Zero Average Dynamics (ZAD) controller and Fixed-Point Induction Control (FPIC) when the control parameter 푁, the reference vo...
Island operation capability in the Colombian electrical market: a promising ancillary service of distributed energy resources
Nowadays most distributed generators are not designed to operate under islanded conditions. The ancillary service of islanded operation capability is proposed as a technical support service with t...
Application of the Internet of Things through a Network of Wireless Sensors in a Coffee Crop for Monitoring and Control its Environmental Variables
This article presents the application of the Internet of things (IoT), as a technological tool for the development of a wireless sensor network with the aim of monitoring and controlling a series of environmental variabl...
Flameless Combustion as an Alternative for Improving the Efficiency of Thermal Systems: State-of-the-Art Review
The increasing energy demand and polluting emissions have generated a growing number of studies into technologies that can be used to mitigate both problems worldwide. Among the alternatives for improving the efficiency...