Correlation Between the Properties of Old Slags and the Recycling Solutions
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 3
Abstract
The blast furnace and basic oxygen furnace route of steel making (from iron ores and coke to steel) or the so called integrated steel production generates simultaneously solid waste products. The slag is predominant, consisting of blast furnace (BF) slag and basic oxygen furnace (BOF) slag. The major share of this has been stored with no control near industrial area forming a metallurgical waste dump. For solving the problems of metallurgical residues and wastes stored in the old dump, the authority develops an appropriate environment policy for a proper management. The landfilled slag is exploited under supervision. The paper presents the sustainable recycling solutions applied in correlation with the properties of old slags. The performance of recycling solutions for each slag type is discussed according to the chemical composition and structure. Specific cooling conditions (as well as the chemical composition) of slag dumped under the action of variable weather conditions are analysed.
Authors and Affiliations
Anişoara CIOCAN, Florentina POTECAȘU, Tamara RADU
Keywords
Related Articles
- EP ID EP587919
- DOI -
- Views 115
- Downloads 0
Mechanical and Laser Cladding of High-Speed Steel on a Steel Support
Multilayer cladding by injection of high-speed steel powder with 0.82%C, 4.7%Mo, 6.4%W, 4.1%Cr, 2.02%V, 0.3%Mn, as chemical composition, in melted bath by CO2 continuous wave laser connected to x-y-z coordinate table was...
Researches Concerning the Correlation of the Semiplanetary Rolling Process Factors
An available solution of the elimination of the superficial cracks network at the continuous cast slabs is the semiplanetary rolling. The application of a semiplanetary rolling mill at the exit of slab from the curve zon...
The Influence of Cold Rolling on the Microstructure for Drawing Steels
The paper presents the structural changes that appeared in steel for deep drawing, as a result of cold rolling and of recrystallization thermal treatment. The research was conducted on samples taken from the rolled strap...
Effect of Acidic Environment on Cu-Al2O3 Codeposition
Electrocodeposition of alumina nanoparticles with copper onto nickel substrate was prepared through the potentiostatic method. The codeposited films were obtained at different nanoparticle concentrations: 5, 10, 15, 20 a...
Regeneration of Used Engine Lubrication Oil by Solvent Extraction. The Solvent Influence on Oil Ratio
Huge amounts of used lubricating oils from automotive sources are disposed of as a harmful waste into the environment. For this reason, means to recover and reuse these wastes need to be found. Problems arising from acid...