Crude Oil based Nanofluids Flow on Inclined Wall
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
In this research work, we investigated the MHD inclined wall over a nonlinear prone stretching/shrinking plate surface on a crude oil based nano fluids flow. Most specifically, the effects of various parameters namely; suction, magnetic, heat source, thermal radiative on temperature in the presence of crude oil based SWCNTs. We used transformation of similarity to lessen the partial differential equation (PDE) to ordinary differential equations (ODE) for the nonlinear governing equation along with their related boundary conditions. The result of the lessened ODEs is unfolded and explained numerically with the application of the fourth/fifth system Runge-Kutta Fehlberg-technique together with procedure and practice of shooting- technique, utilizing Maple 18 code. The result obtained indicated that there is significant positive correlation stretching/shrinking in the presence of SWCNTs-crude oil. Sphere shape SWCNTs-crude oil with the different parameters plays significant roles in the temperature distribution with an increase in various nanoparticles. The rate of heat transfers for sphere-shape is more important when compared and balanced it to the shapes of other nanoparticles in the constructed circulating system in the presence of the magnetic field.
Authors and Affiliations
Jaafar Abdul Abbas Abbood Al Nasrawi, Rozaini Bin Roslan, H Barem
Keywords
Related Articles
- EP ID EP672243
- DOI 10.24247/ijmperdoct201958
- Views 110
- Downloads 0
OPTIMIZATION OF PROCESS PARAMETERS DURING TIG WELDING OF Si-Mg-Mn AL ALLOY 64430
The experimental investigation has been carried out to study the influence of welding current, shield gas flow rate and filler rod on ultimate tensile strength, ultimate load, yield load and yield stress of commercially...
Transient Analysis of Wind Turbine Blades
In this paper, transient analysis has been carried out on the blades to determine the strength of the blade for different blade materials, steel and composite materials ; E - Glass, carbon fibre and aramid fibre by apply...
Study the Effects of Carbon Nano Tubes on Corrosion Behavior of Ni-Pelectro-Less Coating of Low Alloy Steels in Salt Water
The basic aim is to study the resistance of corrosion and hardness of heat treatment of coatings with electro-less NiP-CNT. Various concentration of CNTs ranging, 0, 0.1, 0.2 and 0.4g/L in Ni-P-CNT composite was deposite...
NONLINEAR FINITE ELEMENT SIMULATION OF FRICTION STIR WELDING OF AA7075 T651 ALUMINIUM ALLOY
Friction Stir Welding (FSW) is a solid state joining process. Heat generation and heat distribution of friction stir welding is a fundamental phenomenon and Sound welding is dependent on the adequate heat generation. Due...
EVALUATION OF STANDARD TIME WITH THE APPLICATION OF RANK POSITIONAL WEIGHTED METHOD IN THE PRODUCTION LINE
Assembly line balancing is one of the major concern as far as a manufacturing plant is considered. The plant productivity solely depends on this parameter and hence balancing and figuring out the idle time in a productio...