Cutting of Round Timber with Heart Rot to Structural Lumber
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2021, Vol 12, Issue 6
Abstract
Softwood lumber is widely used for the manufacture of load-bearing structures. However, the quality of round timber for lumber manufacturing has been deteriorating recently. The average diameter of round timber entering sawmills is constantly decreasing, and heart rot is common in large-diameter round timber. This is due to the fact that more and more conifers in the forest are being affected by heart rot. The rot infestation is related to the deterioration of the ecological situation caused by environmental pollution. As a rule, the removal of rot occurs at the stage of round timber harvesting. Therefore, during harvesting, most of the wood with heart rot continues to remain in the forest. In addition to littering the area, it continues to infect sound wood. At the same time, together with the wood affected by rot, the sound sapwood, which has good strength characteristics, is also removed. A method for processing round timber with heart rot into elements of load-bearing structures is proposed. In particular, a technological scheme for manufacturing I-beams from such timber has been developed for low-rise house construction. Corner elements are produced as a result of cutting round timber and removing heart rot by milling. The corner elements are dried in clamped state using special devices. Then they are glued together to obtain beams with a cross-section in the form of an I-beam. A set of equipment for the processing round timber with heart rot was selected. The paper presents the results of calculating the costs for organizing the production. The effectiveness of the technological project is evaluated using the method of discounted cashflows by the following indicators: net present value, profitability index, and discounted payback period. The assessment results confirm the effectiveness of the production organization of load-bearing structures made of round timber affected by heart rot. The processing of wood that remains in the forest into elements of building structures not only increases the wood reserves for construction, but also creates conditions for improving the ecological situation in forest areas. For citation: Toropov А.S., Byzov V.Е., Toropova Е.V., Sergeevichev А.V., Sazanova E.V. Cutting of Round Timber with Heart Rot to Structural Lumber. Lesnoy Zhurnal [Russian Forestry Journal], 2021, no. 6, pp. 160–172. DOI: 10.37482/0536-1036-2021-6-160-172
Authors and Affiliations
А. S. Toropov, V. Е. Byzov, Е. V. Toropova, А. V. Sergeevichev, E. V. Sazanova
Keywords
Related Articles
- EP ID EP698348
- DOI https://doi.org/10.37482/0536-1036-2021-6-160-172
- Views 84
- Downloads 0
Resource Potential of Melliferous Plants of the Steppe Don Region
Melliferous lands comprise the categories of forest fund lands, where melliferous plants and plants that provide high pollen yield grow. Bees pollinating entomophilous plants are 6–10 times more beneficial to forest land...
Response of Annual Ring Width and Latewood Content of Scots Pine to Weather Conditions in Provenance Trials
Tree-ring width and latewood content were studied to assess the response of wood to growing conditions. Samples were taken from the trees of six Scots pine climatypes with contrast origin, grown in the conditions of prov...
Substantiation of Technological Processes and Machinery Systems for Logging Operations
The work analyses the forest raw material resources of the Far Eastern Federal District. Corresponding to the conclusions, it is made an evaluation of a promising technology and systems of machinery for logging. It shows...
Variability Properties of Pinus sylvestris L. Wood in Growing Stock under Technogenic Impact
The issues of variability of pinewood (Pinus sylvestris L.) properties in growing stock located in the vicinity of operating industrial facilities is still relevant. The paper aims to assess the technogenic impact on the...
Quantitative Characteristics of Local Strain Fields in a Top-Liner Board Sample under Uniaxial Tension
The paper presents the method for quantifying the distribution of local tensile (longitudinal), compressive (transverse) and shear strains in a sample of pulp and paper material. The results of its use for the sample of...