CYLINDRICAL-CONICAL SURFACES INTERSECTION USING AUXILIARY SPHERES METHOD WITH MOBILE CENTER
Journal Title: Journal of Industrial Design and Engineering Graphics - Year 2015, Vol 10, Issue 2
Abstract
The paper presents: intersection between two cylinders - one is a rotation cylinder and the other is an oblique circular cylinder; intersection between a rotation cylinder with an oblique circular cone. This method can be applied if the axes of the two surfaces are coplanar. The paper also presents the equations of the intersection curves which become simpler when the two surfaces are rotation cylinders. In this case the auxiliary spheres center is fixed at the axis intersection of the two rotation cylinders. The auxiliary spheres method with mobile center can be applied when a rotation cylinder is intersected with a torus or an oblique cone. The method is often used because it is rapid and allows intersection curve drawing using only a projection of the two surfaces.
Authors and Affiliations
Dumitru Marin, Ligia Petrescu
3D MODELING OF ARCHITECTURAL STRUCTURE BY PHOTOGRAMMETRY METHOD - A CASE STUDY „ĆELE KULA“IN NIŠ
Photogrammetry has a large use in different areas. One of them is architectural practice. Photogrammetry is one of the suitable methods for production of models of existing objects through photography. It represents coll...
QUASI-ACCURATE PRODUCT QUALITY ASSESSMENT METHOD IN INDUSTRIAL DESIGN
The present paper proposes a quasi-accurate quality assessment design method for industrial products, in addition to the measures implemented within an industrial unit, in order to improve product quality, This method is...
DESIGN MODELLING AND ANALYSIS OF A WIND TURBINE BLADE SUPPORT SYSTEM
Wind turbines and green energy is of high interest nowadays and the size of the powerplants keeps getting bigger and bigger. The forces that arise as the blades increase in size have the magnitude to deform the profiles....
THE USE OF NUMERICAL ANALYSIS IN ORDER TO HIGHLIGHT THE FLUID DYNAMICS INSIDE A HYDRAULIC GEAR PUMP MODEL
An experimental method for the investigation of hydraulic fluid flow inside a gear pump model was performed during this study. The external gear pump model was chosen because this volumetric unit is capable to take over...
GEOMETRY AND COMPLEXITY IN ARCHITECTURE
As Constantin Brancuși (1876-1956) said „Simplicity is complexity itself“, simplicity and regularity through the use of basic geometric forms has always played a central role in architectural design, during the 20th cent...