CYLINDRICAL SHELLS MADE OF STAINLESS STEEL – INVESTIGATION OF POSTBUCKLING
Journal Title: Civil and Environmental Engineering Reports - Year 2017, Vol 2, Issue 25
Abstract
The relevant load case of open thin-walled shells is often wind loading during construction. Because of the missing stabilization effect of the roof they show a very high sensitivity to buckling which results into higher wall thicknesses. As part of the European RFCS research project BiogaSS the Institute for Metal and Lightweight Structures of the University of Duisburg-Essen carried out investigations on open thin-walled tanks made of austenitic and duplex stainless steels under wind load to study a possible economic advantage which might be gained from the consideration of the elastic postbuckling behaviour. This contribution presents not only experimental and numerical results but also first recommendations regarding the range of possible buckling reduction factors which might be incorporated in future revisions of EN 1993-1-6 and EN 1993-4-2.
Authors and Affiliations
Sebastian STEHR, Natalie STRANGHÖNER
THE PHENOMENON OF SOIL SUFFUSIONABILITY IN THE AREA OF THE CENTRAL WATER INTAKE IN ZAWADA NEAR ZIELONA GÓRA
The paper addresses hydro-geological conditions of the Central Water Intake in Zawada. A possibility of suffusion being developed there has been analyzed.
VIETNAM FRESHWATER ENVIRONMENT
Vietnam is a tropical country, amount of rainfall is quite much, the network of rivers and lakes is high density. They make Vietnam become one of the countries that have large freshwater resources in Asian. However, fres...
Gasification process as a complex method of sewage sludge treatment
Today, there is a rising interest in many countries in “traditional” (e.g. agro and forest) biomass and waste biomass (e.g. sewage sludge) utilization processes (e.g. combustion, co-combustion, gasification and pyrolysis...
TRUSS JOINT WITH POSITIVE ECCENTRICITY EXPERIMENTAL RESEARCH
TRUSS JOINT WITH POSITIVE ECCENTRICITY EXPERIMENTAL RESEARCH
THE LOAD-BEARING CAPACITY OF TIMBER-GLASS COMPOSITE I-BEAMS MADE WITH POLYURETHANE ADHESIVES
This article discusses the issue of composite timber-glass I-beams, which are an interesting alternative for load-bearing beams of ceilings and roofs. The reasoning behind the use of timber-glass I-beams is the combinati...