D Flip Flop with Low Power Clocking System by using MTCMOS and Slumber Keeper Technique
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 4
Abstract
power utilization plays an significant function in any integrated circuit. We are having three main challenges in semiconductor technology. in any integrated circuit clock sharing networks and storage elements such as flip-flop consume more power. in this paper, an assortment of techniques to implementing flip-flops with low power clocking structure is analyzed. among those different techniques clocked pair communal flip-flop using mtcmos(cpcff-mt) consume smallest amount of power than conditional statistics mapping flip flop (cdsff),conditional expulsion flip flop (ceff) and conservative twin edge triggered flip-flop (teff). we put forward a new (cpcff-mt) with slumbery keeper technique which reduces the power consumption by approximately 30% to 75% than the original cpcff-mt.
Authors and Affiliations
Anusha Kondam
Keywords
Related Articles
- EP ID EP23813
- DOI http://doi.org/10.22214/ijraset.2017.4106
- Views 291
- Downloads 7
LTE Techniques in 4G Wireless System Using Protocol Stack
LTE, an acronym for Long-Term Evolution. 4G LTE is a standard for wireless broadband technology designed to support roaming Internet access via cell phones and handheld devices. Due to the requirements on high data rate...
Improvement of Pavement Soil Subgrade by using Burnt Brick Dust
To stabilize the clayey soil, an experiment is conducted to evaluate the properties of soil blending with different percentage of Burnt Brick Dust of 10%, 20%, 30%, 40% and 50% by weight and then the tests are performed...
Design and Simulation of an Efficient LED Driver for Street Light Application
This paper presents the multistage high brightness (HB) LED driver for the application of street lighting. This paper focus on the reliability because the LED’s may last for greater than 50,000 hours but the drivers may...
Method & Implementation of Relocalisation and Management for Smart System in WSN
during the development of a WSN, it is unknown which influences the nodes might experience, which nodes might crash and how long exactly the sensor nodes will last with available energy. Also nodes might experience high...
Hybrid SWIPER: Synchronization of IP and MAC address to overcome third party attacks in cloud
In a third-party Cloud model, provider delivers the cloud service over the Internet. Public cloud services are sold ondemand, typically by the minute or the hour. Customers only pay for the CPU cycles, storage or bandwid...