Defining the parameters for a brush with polypropylene bristle when uncovering the root system of maternal plants
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 1
Abstract
<p><span style="font-family: 'Times New Roman'; font-size: small;">The paper addresses the operation of a cylindrical brush with elastic rods of bristles at the disclosure of the root system of maternal plants. It has been established that the basic components of the resistance force in the operation of a given brush is the sum of resistances caused by the soil viscosity force, the static resistance of loose particles of soil and the resistance force at removing soil particles. Based on the minimization of costs of energy, the optimal kinematical parameters have been defined for the brush with a vertical rotation axis. The value for the total resistance force is largely affected by the angular speed of the brush. In addition to the resistance force, the rods of the brush bristles are exposed to the normal reaction from the soil base. By deriving the resultant of these two forces using a method of the Legendre elliptic integrals, we have established the optimal dimensional parameters for the rods of bristles made of polypropylene. A given method has made it possible to take into consideration their significant, compared with the rods’ length, deformations as a result of their bending. The rods’ length has been determined to be the maximally possible one to ensure the conditions for the removal of soil from a swath that covers the root system of maternal plants of clonal rootstock. In addition, the influence of the friction force during brush operation has been investigated. This implies friction among soil particles and against the surface of the bristle rods. It was determined that the forces of friction, as well as the normal reaction of soil, have little effect on the operation of a cylindrical brush while opening the root system of maternal plants. This is due to the lack of a solid foundation when a bristle rod is at work, which in turn makes it possible to arrange the bristle rods one by one at the surface of the brush. The absence of necessity in the considerable relative stiffness makes it possible for the bristle rods to remove soil from the swath while minimizing damage to the plants. By using the Legendre elliptic integrals of second kind, we have explored the deflection of bristle rods in a cylindrical brush while opening the root system of maternal plants. The magnitude of the rod deflection during operation affects the degree of it removing the soil particles. An increase in deflection changes the angle between a working facet of the bristle rod and the soil surface. This leads to a decrease in the removal of particles and to an increase in their compaction in a swath. Therefore, we have calculated the length of bristle rods that could ensure the required operating parameters under a predefined load.</span></p>
Authors and Affiliations
Andrii Voitik, Vasyl Kravchenko, Ruslan Oliadnichuk, Olexandr Pushka, Serhii Kiurchev, Oleg Ivanov, Oleksii Nazarenko
Keywords
Related Articles
- EP ID EP666805
- DOI 10.15587/1729-4061.2019.173917
- Views 71
- Downloads 0
Examining the technique to control the structure of current in vortex chambers by wing vortex generators
<p>A new technique was studied aimed at controlling energy-intensive coherent vortex structures (ECVS) that define the processes of mass- and heat transfer in vortex chambers. This is important because the swirled flows...
Development of the unified model for identification of composition of products from incineration, gasification, and slow pyrolysis
<p>This paper considers the processes of incineration, gasification, and slow pyrolysis. The common approach implies the use of individual models for the description of separate processes. When parameters acquire the val...
Design and study of equipment for accepting and drying soya seeds with high moisture content
<p>The studied designs of existing equipment for post-harvest processing do not ensure careful reception and drying of high-moisture soya seeds which leads to a decrease in quality and yield loss. To solve this problem,...
Use of fly ash for conditioning the excess activated sludge during deliquefaction at chamber-membrane filter presses
<p>Results of experimental studies of deliquefaction of excess activated sludge from municipal wastewater treatment facilities in chamber-membrane filter presses were presented. To condition the sludge, fly ash from ther...
Development of the method for structural-parametric optimization in order to improve the efficiency of transition processes in periodic systems
<p>In order to get the most out of the enterprise’s operational processes, the operational processes of functional systems are optimized. However, in the process of optimization, controlled systems over a significant amo...