Deposition Technologies for Obtaining Thin Films with Special Properties
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 3
Abstract
The properties of metallic materials can be improved by deposition of materials. The coating has a tear strength and better hydro-abrasive corrosion. The thin layer deposition has a thickness of less than 10 micrometers. When speaking about deposition technologies, it is not just about deposited thin layers, but the whole assembly (layer / substrate), therefore the degree of adherence and the costs of making such a substrate have to be taken into account and the whole must be much more powerful than anything taken separately. In this paper we presented several methods of thin film deposition. We also highlighted some of the advantages and disadvantages of several deposition methods.
Authors and Affiliations
Andrei-Cătălin ȚUGUI, Petrică VIZUREANU, Carmen NEJNERU, Manuela-Cristina PERJU, Mihai AXINTE, Simona-Mădălina BĂLŢATU
Destruction of the Inside Part of a Coat of a Hard Chrome Cylinder Used for Combustion Engines
This paper had as a starting point the broken down through explosion suffered by the coat of a cylinder made of cast iron. The cylinder coat material must provide the necessary resistance to dynamic and static stresses a...
Phosphate Passivation Solutions Enhanced by Chemical Additives for Treatment of the Hot Dip Galvanized Steel
To stabilize the surface of the galvanized steel it is important to apply a passivation treatment during its manufacturing. The general aim of the passivation treatment is to prevent the formation “storage stain” or “whi...
The Influence of Moisture on Thermal Conductivity for Building Materials
The purpose of the study is to determine the influence of moisture on thermal conductivity for a range of building materials. A series of building materials and insulation materials have a porous, fibrous or granular str...
Impact of Hydrocarbon Exploitation Activity on Surface and Underground Waters in the Area
This paper presents the natural components of water, and those of pollution. For this, water samples were taken from the brook that runs through the analysed area, and from a fountain, located on the edge of the village,...
Pollutant Emissions, Control and Prevention in the Secondary Copper Industry
This paper presents an analysis of pollutant emissions specifics to copper waste valorization. There are made appreciations of the role and importance which have the characteristics of mixed charge with waste having a va...