Design Aand Analysis Oof Process Parameters Oon Multistage Wire Drawing Process- A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
This paper presents the brief review on process parameters of wire drawing for aluminium 1080A. The aim is to analyse and numerically study the process parameters using finite element model and also to investigate the effect of forces on drawing of wire. Various research has been done considering different process parameters such as die angle, speed, force, stress, reduction ratio etc. This reasearch paper evaluates the damage during drawing process, speed and temperature effect on drawing stress. An approach is proposed to evaluate the drawing stress by modifying avitzur model assumption.
Authors and Affiliations
Shweta Verma, P. Sudhakar Rao
Keywords
Related Articles
- EP ID EP463918
- DOI 10.24247/ijmperdfeb201939
- Views 85
- Downloads 0
The Experimental Studies of Heat Transfer and Friction Factor in a Roughened Solar Air Heater using Arc Rib Geometries
Solar air heater utilizes rib roughness to enhance heat transfer. Experimental investigation has been conducted to study heat transfer and efficiency improvement in solar air heater using the arc rib roughness. Rib rough...
Experimental Analysis of a Solar Flat Plate Collector for Enhancement in Thermal Performance using Solar Turbulence Generators
Solar air heaters are now-a-days used in space heating as well as a process heating in domestic applications. Since it is a renewable energy conversion device, enhancement of such devices assumes greater significance due...
Lean Manufacturing Implementation Using Value Stream Mapping to Eliminate Seven Waste in Painting Process
Gas stove producers faced intense competition in the market. This condition encourages gas stove producers to increase productivity by reducing 7 (seven) waste in the production process, especially in painting process. T...
NUMERICAL MODELING OF TEMPERATURE DISTRIBUTION IN LASER BEAM WELDING OF 304 STAINLESS STEEL
A numerical method for solving the laser welding problem of heating and melting is developed in the present investigation. Laser welding is a fast, unbalanced and complex process which requires a non-uniform heat transfe...
Optimizing Process Parameters of Nano SiC Reinforced AA6061 Cold Extrusion using Response Surface Method
The paper focus on preparation of AA 6061 composites with nanoSiC dispersed at varying weight fractions. AA 6061 billets are extruded by varying extrusion ratio, die included angle, ram speed and %SiC, considering Force...