Design & Analysis of Exhaust Heat Recovery System
Journal Title: GRD Journal for Engineering - Year 2018, Vol 3, Issue 6
Abstract
The exhaust gases from the IC Engine caries away about 30% of heat of combustion. The energy available in the exit stream goes as waste, if not utilized properly. The major technical constraint that prevents implementation of ways to heat recovery system is due to its intermittent and time mismatched demand and availability of energy. In the present work, a storage container is integrated with IC engine setup to extract heat from the exhaust gases using a copper plate being heated by forced convection. The performance parameters pertaining to the heat recovery such as amount of heat covered, temperature achieved at every RPM, velocity of exhaust gases and flow curves will be evaluated, analyzed and reported. The feasibility, advantages and disadvantages of the project have also been discussed
Authors and Affiliations
Hardik Jamwal, Shivam Sharma, Sourab Gupta, Sanjeev Gupta, Siddhant Jandial
Keywords
Related Articles
- EP ID EP293005
- DOI -
- Views 76
- Downloads 0
Tuning of PID Controller for Biochemical Reactor using IPSO Algorithm
This paper addresses an improved PSO algorithm based PID controller tuning for a model biochemical reactor. Biochemical reactor is a highly nonlinear process and exhibits multiple steady states. To increase the productiv...
Microcontroller Based MPPT Buck-Boost Converter
The demand of solar energy has increased rapidly in this decade. This is due to the advantages of the energy compared to other form of sources. The solar energy conversion system is very interesting alternative on supple...
Design and Modification of Bench Vice by Increasing the Degrees of Freedom
A Bench vice or fixture is a production tool. The main aim is to locate, support and hold the work securely so we can perform the required machining operations. Feeler or thickness gauges and set blocks are also used to...
Dynamic Value Stream Mapping in the Realm of Green Manufacturing
Value stream mapping is a lean tool which is used in lean manufacturing to find the flow of information and material, as a product it makes way through value stream. These envision tool helps to understand processes by u...
Study on Minimizing CO2 Emissions in Clinker Unit of Cement Plant in Sultanate of Oman
The design project of Chemical Engineering focus on solving the problem related to a chemical or process industry. The aim of the research paper is to establish study on gaseous emission in cement industry of Sultanate o...