Design And Analysis Of Combined Extrusion Forging Die Behavior Under Thermal Structural Loads
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2017, Vol 5, Issue 2
Abstract
We all know extrusion and forging are two different processes of manufacturing but in recent past researches combined these two process to reduce the production time, production cost etc.Combined extrusion-forging processes are now getting importance for its abilities to give improved material properties, high production rate and less material waste when compared with that produced by machining, casting or by assembling the individual parts produced by different manufacturing processes. In its simplest form of combined extrusion forging process, a billet is forged by punch and dies with punch/die or both containing an opening for extrusion. This tooling arrangement permits the simultaneous lateral spread due to forging, and backward/forward extrusion or both forward and backward extrusion simultaneously through the die/punch opening(s). In this study we are going to develop a die for extrusion-forging using knowledge from previous journals and books, we will develop a die for a flange with pipe using CAD and CAE packages. A basic die is designed and tested at maximum working conditions under thermal structural loads in simulation software ANSYS and the design of the die is further improvised to minimize the stress and improve life based on safety factor issues.
Authors and Affiliations
Yedla Veerababu| PG Scholar, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Anathavaram yvbabu8@gmail.com, P. Satish Reddy| Assoc. ProfessorDept of Mechanical Engineering, Prasiddha College of Engg & Tech, Anathavaram, satish2436@gmail.com, N. Guru Murthy| Asst Professor, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Anathavaram, murthy408@gmail.com, M Manoj| Asst Professor, Dept of Mechanical Engineering, Prasiddha College of Engg & Tech, Anathavaram, mattamanoj13@gmail.com
Keywords
Related Articles
- EP ID EP16884
- DOI -
- Views 346
- Downloads 6
Data Access In Disruption Tolerant Networks Using Cooperative Caching
Disruption tolerant networks (DTNs) consist of mobile devices that call each other opportunistically. Due to the low node density and impulsive no demobility, only broken network connectivity exists in DTNs, and the...
Performance Analysis of Wavelet Packet Based SPHIT Algorithm
The necessity in image compression continuously grows during the last decade. An image compression algorithm based on wavelet packet transform is introduced. This paper introduces an implementation of wavelet packet...
BESS based Multi input inverter for Grid connected hybrid pv and wind power system
This paper proposes BESS based multi input inverter for grid connected hybrid PV and wind power system. This system will simplify the power system and reduce the cost. The proposed system consists of a battery system...
Combination Methodology For Protected Formal Deduplication In Cloud Computing
Data Deduplication is an significant method in favour get rid of redundant data as an alternative of captivating files, it provisions merely distinct copy of file. Among the entire organizations many organizations, s...
Extermination of DDoS Attack By Software Puzzle System
DoS/DDoS attaacks are among the genuine risks to computerized security, and client confound, which asks for a client to perform computationally costly operations before being surrendered organizations from a server,...