DESIGN AND DEVELOPMENT OF PROTOTYPE PROTOTYPE CONTROL SYSTEM USING DISTANCE SENSORS
Journal Title: Electro Luceat - Year 2019, Vol 5, Issue 2
Abstract
The research carried out aims to create an electric motor speed control and braking system that is used as a reference for electric car safety systems. By regulating the voltage received by a DC motor. This system uses Arduino UNO as a controller. To measure the distance of a car with a barrier using the Ping Parallax proximity sensor. Signal PWM (Pulse Width Modulation) from the microcontroller is used to regulate the speed of the DC motor as the main driver of the vehicle. Tests carried out using a miniature car with a track length of 2 (two) meters. The speed of a miniature electric car will stop before a collision occurs. braking uses the method of plugging by reversing the source polarity at distances below 10 (ten) cm, so that the motor will spin back to avoid the rest of the motor rotation that does not get a supply voltage. From this method, several motor conditions will be stopped gradually. Display distance between the vehicle with a barrier and motor rotation speed can be seen on the LCD
Authors and Affiliations
Alimuddin Mappa, Markus Sogen
Keywords
Related Articles
- EP ID EP664507
- DOI 10.32531/jelekn.v5i2.153
- Views 77
- Downloads 0
RANCANG BANGUN PROTOTYPE SISTEM PENGENDALIAN KECEPATAN DAN PENGEREMAN MENGGUNAKAN SENSOR JARAK
Penelitian yang dilakukan bertujuan untuk membuat sistem pengendalian kecepatan dan pengereman motor DC secara elektris yang digunakan sebagai referensi sistem...
STUDI POTENSI PEMBANGKIT LISTRIK TENAGA SAMPAH (PLTSa) PADA TEMPAT PEMBUANGAN AKHIR (TPA) MAKBON KOTA SORONG
TPA mengemisikan Landfill Gas (LFG) yang mengandung paling banyak metana dan karbondioksida. Metana memiliki efek pemanasan beberapa kali lebih kuat dalam menyebabkan pemanasan bumi dibandingkan dengan CO2. Oleh karena i...
STUDI OPTIMALISASI KUALITAS SISTEM CATU DAYA TERINTEGRASI PADA PT. TELKOM STASIUN BUMI SORONG
Sistem catu daya pada industri Infokom menggunakan konfigurasi yang cukup rumit agar menjamin kehandalan dan kelangsungan catu daya itu sendiri, dengan digunakannya beberapa perangkat yang bersifat induktif seperti recti...
DESIGN AND DEVELOPMENT OF PROTOTYPE PROTOTYPE CONTROL SYSTEM USING DISTANCE SENSORS
The research carried out aims to create an electric motor speed control and braking system that is used as a reference for electric car safety systems. By regulating the voltage received by a DC motor.  ...
TEMPERATURE AND HUMIDITY MOISTURE MONITORING SYSTEM WITH ARDUINO R3 AND DHT 11
This study discusses how to design an AC (Air Conditioner) system that can work based on the temperature and humidity of the room that is regulated by a system that uses Arduino UNO as a controller. Meanwhile, to measure...