DESIGN AND DEVELOPMENT OF SPR INSTRUMENT BASED ON Ө-2Ө MECHANICAL INTEGRATION TECHNIQUE
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
Surface Plasmon Resonance (SPR) instrument is an important tool in the field of biomolecular interaction studies. The SPR instrument is basically an optical measurement technique and its construction is very complex. The construction of the SPR instrument is not that much easy because it is an integration of optics, mechanical, electronics and electrical. However, the instrument operation depends on the mechanical movement of the resonance angle. Based on the mechanical aspects the instrument is constructed in different aspects for better generation of SPR signals. To generate SPR signal the optical prism with a sensor is rotated by the stepper motor for resonance angle and the signals are collected at the detector. The optical setup is rotation by Ө-2Ө for optimal to produce the effective SPR signals. This paper describes the fabrication and working of SPR instrument based on Ө-2Ө.
Authors and Affiliations
RAJAVELAN M, BALDWIN IMMANUEL T, GNANAVEL C, SATHISH KHANNA P
Keywords
Related Articles
- EP ID EP430494
- DOI 10.24247/ijmperdoct201836
- Views 82
- Downloads 0
Artificial Intelligence Based Green Manufacturability Quantification of a Unit Production Process
Environmental awareness and sustainability among consumer is increasing since past decade. These consumer activity forces the industry to maintain the environment, and it began to trouble them to balance the monetary and...
Heat and Mass Transfer Analysis of Steady MHD Free Convective Fluid Flow Past an Inclined Stretching Porous Sheet with Viscous Dissipation and Radiation
The present paper describes MHD free convection flow past inclined porous stretching sheet under the influence of viscous dissipation and Radiation effects. Similarity transformations are used to reduce non linear partia...
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Prediction of Optimal Torques from Gait Analysis Applying the Machine Learning Concepts
With the advancements in engineering and technology and with the advent of the fourth industrial revolution made the solution for complex and dynamic problems easier. Many researchers had incredibly investigated about th...
Investigation on Startup of a Small Horizontal Axis Wind Turbine
Wind energy plays an important role in the power generation as the fossil fuels become more and more scarce and costly. Small horizontal axis wind turbine has been considered in this study and its problems are identified...