Design and Fabrication of Black Box Ejection System for a Civil Transport Aircraft
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Flight data recorder (FDR) and Cockpit voice recorder (CVR) are very important and play vital role in the investigation of the flight accidents. These are also used to locate the aircraft crash site and the circumstances in which the aircraft is crashed. There are many cases where the black box location is not identified. This project reveals simple, economic and safe ejection of FDR in case of aircraft crashes. A simple Pneumatic system with air bottle is used to operate both the hatch door and the ejection system. After the ejection, a parachute is used to land the black box little far away from the crash site debris in a safest location. Three sensors are installed on the aircraft to sense the temperature, deformation and frequency of vibration of the structure. The system is activated and ejection process takes place only when abnormal values i.e. temperature, deformation and frequency of vibration are recorded
Authors and Affiliations
KALAVAGUNTA VEERANJANEYULU, UDAY DEEPIKA. A
Keywords
Related Articles
- EP ID EP281456
- DOI 10.24247/ijmperdfeb2018152
- Views 77
- Downloads 0
Performance Evaluation of VCR CI Engine Using C-D Intake Manifold With Internal Grooving
Compression ratio (CR) is a design parameter that influences efficiency, characteristics as well as emissions from the engine. Varying of Compression Ratio is done to increase fuel efficiency under varying loads. The exp...
Development of Renewable Energy through Heat Enhancement for Lubricants by Adding Nano Materials
Industrial machines’ efficiency mostly depends on its crucial components performance in many naval applications such as hydro plants, ships, vehicles and power generation stations etc., depending on reliability and safet...
The Design and Fabrication of a Compound Die to Make Hexagonal Washer
Many parts and components used in mechanical industry are manufactured by cold pressing operations. Die is the main tool in these operations. There are different types of dies like progressive die, compound die and combi...
COMPARISON OF ABLATION RESISTANCE AND THERMAL CONDUCTIVITY OF C-PH AND CNT COMPOSITE LAMINATES
Supersonic aerospace vehicles which operate at very high speeds are supposed to sustain lots of heat due to skin friction. There is always a need for materials which are light in weight and show excellent thermal resista...
Experimental Investigation on Mechanical Properties of AISI 316l SS Weldment by Using GTAW Process
Welding is considered as one of the most important methods of metal joining process among other joing process. In this study, GTAW and Pulsed GTAW process is are used to weld AISI 316L type of Austenitic steel(3)along w...