Design and Implementation of a Single Stage AC-DC Energy Harvesting Converter for Microgenerator

Abstract

In this project, a direct ac-dc power electronic convertor topology is proposed for efficient and optimum energy harvesting from low – voltage micro generators. The convertor utilizes the bidirectional current - conduction capability of MOSFETs to avoid the use of a front – end bridge rectifier. It is operated in the discontinuous conduction mode and offers a resistive load to the micro generator. In this project, a chip has been designed and tested to demonstrate the feasibility of operating a digital system from power generated by vibrations in its environment. Then, two direct ac-dc power electronic convertor topologies are proposed for low voltage micro generators. These two are mainly used in designing the convertor for energy harvesting. The main application of this convertor is used in pacemaker. For this purpose currently we are using lithium battery to give pulse to heart muscles. But this battery is not chargeable. In this we are designing convertor for low voltage energy harvesting especially for pacemaker applications. The future work is that the closed loop of energy harvesting convertor for micro generator can be developed using artificial intelligent technique controllers like fuzzy logic controller, neural network, and genetic algorithms and can be compared with conventional controllers like PI, PID controllers.

Authors and Affiliations

Preethi varsha. V, Harini. P

Keywords

Related Articles

Differential Protection of Power Transformer Using Simulink

In this research work we propose a simple and effective technique based on the Clark’s transformation. Which avoiding the mal-operation of differential protection relays during inrush currents and trip signal generated...

Status of Urban Co-Operative Banks in India

Co-operative banks are organized and managed on the principle of co-operative, Urban Co-operative Banks (UCBs) occupies an important place among the Non-agricultural credit society. The origin of the UCBs banking moveme...

Switched Zeta-Derived Topology Based On Modeling and Simulation for Lighting Load

High brightness white light emitting diodes (LEDs), has been attracted a lot of attention for general lighting applications conventional light bulbs in domestic, commercial, and industrial environments with high efficac...

Traffic Monitoring System Using IR Sensors

The project deals with counting the vehicle direction wise and also to alert the driver if there is any road block further ahead. system is implemented using two IR sensors in each signals and main roads. when the vehic...

Microstructure study on cement mortar using green sand and copper slag – A review

This paper deals micro structure of cement mortar with green sand and copper slag as replacement of fine aggregate. The replacement of green sand and copper slag will be gradually from 10%, 20%, and 30% by the weight of...

Download PDF file
  • EP ID EP19999
  • DOI -
  • Views 311
  • Downloads 3

How To Cite

Preethi varsha. V, Harini. P (2015). Design and Implementation of a Single Stage AC-DC Energy Harvesting Converter for Microgenerator. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 3(3), -. https://europub.co.uk/articles/-A-19999