Design and Implementation of Automation System for Water Leakage Test in Vehicle
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 4
Abstract
In this study, design and implementation of automation system for water leakage test, which is one of the quality control tests, in vehicle is explained in detail in order to ensure continuous operation and without interruption of serial production line. Before vehicles are transferred to the next assembly station, it is ensured that all the vehicles are tested at the same standard pressure values and at equal duration in the proposed pressurized water test system. The minimum energy and water consumption has been aimed during carrying out these processes. For this purpose, some design changes have been made compared to conventional systems. Thus, up to 40% energy and up to 80% water savings have been achieved. In addition, by making the system independent from the operators, the proposed automation system prevents the production process from being interrupted or the system running unnecessarily.
Authors and Affiliations
Murat AYAZ, Koray ERHAN, Engin ÖZDEMİR
Keywords
Related Articles
- EP ID EP491164
- DOI 10.29109/gujsc.390283
- Views 97
- Downloads 0
Bandwidth Efficient Overlapped FSK Coded Secure Command Transmission for Medical Implant Communication Systems
Nowadays, wireless communication systems are exploited in most health care systems. Implantable Medical Systems (IMS) also have wireless communication capability. However, it is very important that secure wireless commun...
The Effects of Weft Density, Weft Yarn Count and Weave Type on Air and Water Vapor Permeability in 100% Acrylic Woven Fabrics
In this study, the effects of weft yarn count, weft density and weave type on the air and water vapor permeability properties of 100% acrylic woven fabrics were examined and evaluated statistically. Fabrics were produced...
The Effect of Heat Treatments on Alloying of Pre-mixed Al + 4.5 wt. % Cu Powders
In this study, 4.5 wt. % Cu powder was added to Al powder and mixed for 45 minutes to produce premixed metal powders. Premixed powders were compacted by cold pressing at 20 MPa. After that these samples were pressed at 5...
Semi Quantitative Evaluation of the Workers’ Findings About Health and Safety in Health Sector
In this study a semi-quantitative analysis was done in order to determine the views of workers who work in direct medical services related to health and safety hazards and risks in the workplace by receiving the opinions...
Synthesis and Characterization Studies of New Generation MIL-101 Materials
MIL-101, a kind of Metal Organic Frameworks (MOFs), has attracted attention in recent years with its promising applications in the chemical industries. MIL-101 is also known as “Porous Chromium Terephthalate”. It has ver...